make you projector more compact and smart

[bridge]

Hi All,
A little long time not be here often, best wishes to all of you, my friends.
Yes, I am here and want to introduce our new design high power green lasers to you, now, you can easily do small sizes blue, and red, green change to bigger sizes unit in your projector, that's in All Laserwave men's heart these days and thought we can do something for help.
of course, I know all of us like pictures.
one(metal color) is smallest 1W series green lasers, sizes is 78*26*28mm, without TEC, but left TEC room, you can cooling your green laser single or cooling your green, red and blue lasers together in your projector.
the other(black color) is smaller 1W or 1.5W series, sizes is 123*50*42.8mm, with TEC inside, you don't know how to cooling your lasers, we had done it for you, you only need is choose this laser and easily building in your projector to make it working.
Your view is great welcome, you know your words is best motivity,power for laserwave, thanks.
Best regards!
Bridge

[norty303]

Wow, that TEC cooled one is seriously small!! I've got 640s the same as the one on the right of the 532, and a 532 the same size as the blue to the left of it so can appreciate just how weeeny the new green is!

[djlorenz]

nice new greens Bridge!
wery good work!

[shanecapps]

where do you get these?

[badger1666]

try a laserwave agent like ct lasers

[dave]

One thing that Bridge missed. Both versions will need to be mounted to a decent sized heat sink

[badger1666]

hey bridge what sort of prices are we looking at for these ?
any charts you can post to show how well they modulate ?

[edison]

Great to see the progress of smaller greens. They fit my own lasermodules perfect. Is the beamheight still 29mm like the old ones? Also spend a little bit more on the cable sinds the old ones arev quite stiff and so difficult to get rid of the lenght of the cable.

[SrS]

Great to see more small modules without a fan!

Only what is the tradeoff for the small modules? Because usually the higher power modules contain 2 tecs, one for the diode and another for the crystal. The closer the tec & feedback the more stable it will be. (please correct me if wrong ) And here we have a 1W module that can only be cooled with one tec under the entire module.

[bridge]

Thanks for all of you attentions.
About prices, please contact your local distributor or ourself directly, About power test charts I thought your guys test will be better than ourself test, thanks.
yes, the beam height still 29mm, the cable is much soft than before, length can do with customer requirement if you told us when you order.
with time going on, many things changed our before thought, long time ago, we never thought using Lasers for TV, but now, look like it will change our life soon, one tec or double tec, if you well design, there is not much different, cooling LD is not change it 's wavelength, it is make the doide more long life, crystal had best working tempeture, you know we can find way match both, . Also the without TEC lasers is for who want to building R,G,B in one and cooling all in one, of course, it can separately cooling too.
Thanks for all of your kindly words.
Best regards!
Bridge

[badger1666]

Thanks for all of you attentions.
About prices, please contact your local distributor or ourself directly, About power test charts I thought your guys test will be better than ourself test, thanks.
yes, the beam height still 29mm, the cable is much soft than before, length can do with customer requirement if you told us when you order.
with time going on, many things changed our before thought, long time ago, we never thought using Lasers for TV, but now, look like it will change our life soon, one tec or double tec, if you well design, there is not much different, cooling LD is not change it 's wavelength, it is make the doide more long life, crystal had best working tempeture, you know we can find way match both, . Also the without TEC lasers is for who want to building R,G,B in one and cooling all in one, of course, it can separately cooling too.
Thanks for all of your kindly words.
Best regards!
Bridge

what no test charts ? you rely on one of the forum members to do it better
than you ,your the manufacture and can't supply test data
well i for one would not consider spending that kind of money with out knowing how well its going to work, hmm now i am confused

[Robin]

what no test charts ? you rely on one of the forum members to do it better
than you ,your the manufacture and can't supply test data
well i for one would not consider spending that kind of money with out knowing how well its going to work, hmm now i am confused

The tests performed by PL members are generally better than manufacturers' data sheets because of the real world conditions applied to the hardware. These look like pretty neat units and if I had the technical skills to write a review comparable in quality to what I've seen here on PL, I would be sending bridge a pm requesting a unit for evaluation and testing.

[norty303]

I agree, end user impartial testing is always going to be better than manufacturers claimed specs - at the very least it removes any suggestion of any falsehoods. The various tests done my members here have been very thorough and well written up - now who is going to do it?

[badger1666]

Yes pl tests are great and if I had a suitable power meter
I would love to test it.
But as a hobbyist it's a big gamble to buy one with no data at all, so I am just saying it would not hurt bridge to put up the data he had so far, as he would have done a lot of testing before selling it, I am sure it's going to be good coming from laserwave

[norty303]

At a guess I would say that the specs re: beam diameter, divergence, etc would be comparable to their other lasers of the same power rating. It looks like they've just done a re-package job using different casings, etc. Perhaps Bridge can verify the core details?

[drlava]

Very small for that power! How good is the linearity and modulation recovery speed on these units? I think many people find this important and would like to know.

[bridge]

Very small for that power! How good is the linearity and modulation recovery speed on these units? I think many people find this important and would like to know.

The same of our other products, will do test of linear tomorrow and show here
modulation speed is 30KHZ.

[andy_con]

price bridge ?

[bridge]

price bridge ?

Hi Andy, please contact Rob for detail prices.
not much different of our normal products prices.
best regards!
Bridge

[catalanjo]

Hey stanwax looks like your cue!
Cheers

[andy_con]

Hi Andy, please contact Rob for detail prices.
not much different of our normal products prices.
best regards!
Bridge

ok cheers,

im also assuming the psu is smaller as theres not tec controls in it?

[bridge]

ok cheers,

im also assuming the psu is smaller as theres not tec controls in it?

For OEM power supply, The control board we used the same unit as our before, the PSU can using smaller unit, thanks.
Best regards!
Bridge

[bridge]

Hey stanwax looks like your cue!
Cheers

Yes, stanwax
Best regards!
Bridge

[andy_con]

For OEM power supply, The control board we used the same unit as our before, the PSU can using smaller unit, thanks.
Best regards!
Bridge

so the psu is the standard psu from the big 1watt module??

[bridge]

so the psu is the standard psu from the big 1watt module??

Yes, the control board(on the top of heatsink) is the same of the big 1W module, 5V power supply is small than before.