Can laserworld scanners be taken out and installed into another non-laserworld projector?
Member
Laserworld scanners HELP!
Can laserworld scanners be taken out and installed into another non-laserworld projector?
CT. Lasers
of course.
just make sure you take everything needed. scanners, amps, cords, power supply.
-Marc
ILDA- U.S. Laser Regulatory Committee
World Wide Authorized Dealer for:
USA Certified / Varianced Laser Light Show Company and System manufacturer
- Pangolin Laser Software and Hardware
- KVANT Laser Modules & Laser Systems
- Viasho Lasers
- DHOM Ultra Lasers Laser Modules
- One Stop Laser Shop Optics and Mechanics
- Cambridge Technology & Eye Magic Professional Scanning Systems
Member
ty
Excellent thank you!
Senior Member
mark it
and dont forget to mark the scan amps and galvo x and y dont want to get them the wrong way around thats unless they are already marked
but i have seen it happen when x amp was plugged into a y galvo and so on and then fired up it squealed like a pig and died
Senior Member
Just like to make one point which no one seems to have mentioned.
Despite LW projectors having differential ILDA inputs, the scanner signals are routed through preamps on the DMX card, and emerge through internal LW leads as SINGLE sided signals which then make their way to the scan amps.
So if installing into another projector make sure you realize that these scan amps as wired by LW have single sided inputs or things might get a little "strange".
Cheers
Posting Permissions
Reply With Quote
