Group buy HL6385DG 150mw, 642nm reds

[dave]

Since the 638 diodes fell thru, i have been thinking of getting a group buy for decent diodes going.

Prices as follows: [edit - I should mention paypal fees and shipping will be extra ]

HL6385DG

price ea lot of 50: 90Euro
price ea lot of 100: 80Euro

HL63133DG

price ea lot of 50: 125Euro
price ea lot of 100: 110Euro





show interest below

6385:

Interested parties:
Dave: 12 diodes
loopee - 4 diodes
P1t8ull - 6 diodes
Laserbiker - 2 diodes
Geetone: 1 diode
Dnar - 2 diodes
Anon: 16 diodes
catalanjo: 2 diodes - maybe 63133 instead?
CHRS33: 4 diodes
CSMN: 2 diodes
matratzki: 3 diodes
LesioQ - 1 diodes
Dyak: 1 diode
cerocool: i diode
daguin - 1 diode or 63133

63133

kecked: 2-4 diodes
Doc: 2 diodes

[mccarrot]

good price...but what about shipping, inssurance and customs taxes...

And is this including VAT? is it possible to get a invoice?

[edison]

I,m interested. My quad and 8 setups finally start coming together and i will recieve the parts on thuesday. I will build them now with open cans just to see what the result is but i can swap them afterwords. I will order as much as i can afford

[loopee]

Hey Dave

I'd be definately up for four, possibly go up to eight

Need to balance out some blue

Troy

[dave]

good price...but what about shipping, inssurance and customs taxes...

And is this including VAT? is it possible to get a invoice?

so many questions!

Shipping would be low cost. They would be sent from Australia, and can be valued at whatever value you decide on. Invoice is no problem. Insurance is no problem, but the shipment will have to be valued at full value. Shouldn't be a problem for small quantities.

I should have mentioned, if Australian sale, GST will be applicable - sorry Troy

[p1t8ull]

Six sexy diodes for p1t8ull please

[Pardini]

Hi Dave,

sorry for a little OT.

can you also get the HL63133DG diodes. It is more sexy for me. (170mW, isolated Can)

http://www.opnext.com/products/pdf/o...133dg_Rev1.pdf

Pardini

[laserbiker]

Hi Dave

Please put me down for two of these HL6385DG diodes. That said, I would also be interested in the HL63133DG instead, if there is any possibility of a group buy for those.
Thanks

Laserbiker

[dnar]

Ouch, 80 euro... I'm out.

[andy_con]

i could be interested

[edison]

Yes, Im very interested in the HL63133DG diodes too. Lets try something different here.
They do 170mw at a minimum of 632nm so the beam has 20mw more and the wavelenght is lower so their for more visible It would be great to have these diodes in my 8 setup combiner

[andy_con]

Yes, Im very interested in the HL63133DG diodes too. Lets try something different here.
They do 170mw at a minimum of 632nm so the beam has 20mw more and the wavelenght is lower so their for more visible It would be great to have these diodes in my 8 setup combiner

subject to price

i ould be tempted with these also dave.

if only i could afford 30 of them for another project i have in mind

[DjMagnus]

subject to price

i ould be tempted with these also dave.

if only i could afford 30 of them for another project i have in mind

Are there a 15w rgb in the binoculars?

[dave]

List updated.

I fired off a email for HL63133DG pricing, Ill see what is come back with price wise..

[wondertwnz]

Pending price I would try up to 8 of these.

Larry

[polishedball]

List updated.

I fired off a email for HL63133DG pricing, Ill see what is come back with price wise..

Are the beam specs just as good?

[Pardini]

"Are the beam specs just as good? "

Not my own experience, but I has read in german Laserfreak that the beam specs are comparable to the 642's.

This feels well enough for me. Now I hope for a good price.

Pardini

[edison]

Pardini, Thanks you for giving the info on the HL63133DG diodes. For allot of people this could be the way to good reds.

[laser_freak]

Are the beam specs just as good?

According to the datasheets they have the same exact typical divergence. However I don't know if there is any difference in the emitter size.

[badger1666]

According to the datasheets they have the same exact typical divergence. However I don't know if there is any difference in the emitter size.

it naffs me off they dont put emitter size in the spec sheets
after all its a big decider as to if the diode is any good for what ever your going to do with it

[king4quarter]

what happened to the 638 500mw diodes?

[badger1666]

what happened to the 638 500mw diodes?

they are no good emitter size to big to make a usable beam
well not very easy, might do it with a complex and expensive lens setup

[king4quarter]

thats a pitty,they all end up costing a fortune anyway cuz such low power diodes always need duels and quads and tentuplets and god knows what else and it means for us who have no tools ect that we have to buy them from other people who do make them,Arrrg...

anyone got a quote on a 600mw build?

[dave]

I understand from a good source, the HL63133DG diodes will happily run all day at 200mw

[edison]

Now that is something i needed to hear!!!! So with my new 8 combiners i can make 1.6 watt of 637 ? Wait one second....... I have to clean my keyboard because its covered with drool