Removing diode form Aixiz

**wondertwnz** · 11-03-2011, 21:48

Wondering if anyone has any suggestions for trying to remove a diode mounted in a Aixiz module?
Larry

**dave** · 11-03-2011, 22:15

I have had luck with a un-threaded pcb spacer

**polishedball** · 11-04-2011, 08:49

I have always just cut & cracked them out with a dremel, like what is done when extracting the red didoes from sleds.

**DTR** · 11-05-2011, 08:29

I have one of these. It is $15 but it is worth it to have one handy when you need it.

http://laserpointerforums.com/f64/di...tml#post559783

**sugeek** · 11-05-2011, 12:54

Originally Posted by DTR

I have one of these. It is $15 but it is worth it to have one handy when you need it.

http://laserpointerforums.com/f64/di...tml#post559783

Thanks for the Link. I met FlamingPyro at NWLEM nice guy.

-Adam

**lasersbee** · 11-05-2011, 15:24

You can buy a telescopic radio Antenna...take it apart and one of
the sections will fit just between the 5.6mm LD housing and the Aixiz
case from the font. Just tap it with a hammer and the LD will be
pushed out. That's what I use when I need to reuse the LD.

Jerry

**dave** · 11-05-2011, 20:09

Yep, this is what I use here - just chuck it in a drill press and press the diode out ( with the drill not spinning!!).. I have successfully removed 642nm diodes this way..

http://www.jaycar.com.au/productView...SUBCATID=982#1

Thread: Removing diode form Aixiz

Thread Tools

Removing diode form Aixiz

Posting Permissions