UKLEM 12 Bring and Buy

[RGbee]

Not got anything useful yet to add to the table, but feel free to post your wears (just so i/we know to go to the bank before coming!)

I'll start:
Scanpro20 DMX board
designed for >20k scanner

5 operation mode set by DIP switch.MX512,sound,self-test,animation, combination
picture effect,ˇ

3 laser Mod output, TTL

Axis resolution:8bit,-5~+5V,differential

ILDA auto switch

4 animtion,128 figure,32 combination picture effect inside

Power requirement: +15V / -15V

DMX control- 14channel

DIP switch table: sets operation mode
scanpro_dmx.jpg

[Jem]

Anyone interested in a 30mW+ HeNe laser (about a meter long), ideal for holography? I have a 'spare' one here in 'as new' condition. If anyone's interested i'll bring it along.

I also have an 8' x 6' Fastfold projection screen with both front and rear projection screens all in a flightcase. I won't bring this unless anyone is interested as it's quite heavy.

What about a 20mW (110v) single line argon? anyone interested. I can let you have a suitable transformer with it (but it's bl**dy heavy - ask Simon )

I'll also bring a box of bits that i've accumulated over the years, may be some spare parts that folks can use in their projects.

Jem

[smogthemog]

I will have some E-Stop stations, A nice AC/DC Amp/Volt Clampmeter, A box of old Argon PSU bits and a ML Argon tube tube and a few other bits and bobs up for grabs.
I also may have a huge UPS system too, if I can get it working.

[andy_con]

i might have an 8 diode 445 module for sale

[danielbriggs]

I also may have a huge UPS system too, if I can get it working.

Tell me more more more...! "how do you like it, how do you like it?"

[smogthemog]

Its a Meta Systems HF910 with the additional battery pack.

The main unit has 12x 12v 7Ah batteries in it and all the electronics gubbins
The remote battery pack has 27x 12v 7Ah batteries in it and HAS to be dismantled to make is movable, it's incredibly heavy! although when assembled both units are on wheels.

[tonyaztec]

Not sure I have anything to sell, other than my body

See you there guy's, I'll be glad to get that bloody lump out the back of my van

[danielbriggs]

both units are on wheels.

Pwhoar...
Anything originally meant to be on wheels is fookin' A.

[smogthemog]

I Think I have found the problem...........

Just cleaning it up, extracting the diodes and seeing what else is up. I'll get the fummit working you see

[vjernst]

I also have an 8' x 6' Fastfold projection screen with both front and rear projection screens all in a flightcase. I won't bring this unless anyone is interested as it's quite heavy.

Jem

if you can make me a nice offer for this please pm me

[Jem]

if you can make me a nice offer for this please pm me

PM Sent

*********

[danielbriggs]

I'd be very jolly if anyone wanted to snap this up; all offers considered. I can lug it to Surfleet!
http://www.photonlexicon.com/forums/...0-Desktop-Mill

You are all aware it *is* tradition to have a mill at Surfleet.
Without one there, I fear it won't be quite the same!

[smogthemog]

I'd be very jolly if anyone wanted to snap this up; all offers considered. I can lug it to Surfleet!
http://www.photonlexicon.com/forums/...0-Desktop-Mill

You are all aware it *is* tradition to have a mill at Surfleet.
Without one there, I fear it won't be quite the same!

Are you looking for a fight?
(mouth moves alot and for a long time but only the above words actually are spoken)

[andy_con]

Oh go on then I'll bring mine :-)

[p1t8ull]

Jim, I'm planning on bringing some engineering odds and sods as well.

Just need to know what is holding the roof panels on, and max weight the kitchen floor can take?
Guessing you would prefer the kitchen? should be easier to mop up the coolant.

Oh, and do you want me to arrange the swarf skip?

Thanks pal.



You... fight like pansy

[p1t8ull]

I'll have a gaggle of 12v rotary Ledex solenoids (good for shutters) on the table if anyone needs any

[smogthemog]

OK, OPSL - Simon - Prey tell????

Don't tell me, White-lights bathroom lamp and YOU stole it?

[p1t8ull]

Haha, not quite mate.. just jo-ho-kin' about swiping the one Mr Insanity was working on, but the bugger secured it before I could lift it and make off in a stolen cab

[smogthemog]

Will this said OPSL be briefing the shores of Surfleet in the next 168hrs?

[Insanity]

Will this said OPSL be briefing the shores of Surfleet in the next 168hrs?

Sadly not, it will be lighting up the London skyline for the next 8 months as of tomorrow, all 9.6 watts of it, assuming Boris Johnson doesn't blow it up when he hits the big red start button tomorrow night and assuming Simon hasn't chaffed it...

Mark

[smogthemog]

Gosh! Cool beans that man

PAT is all here awaiting your huge equipment Mark!


PS - Where exactly will it be situated Mark? Like exact GPS reference please

[Insanity]

OOhhh luverly... Thanks mate..

Wishes he could think of a suitably pervy reply... Soferene, I believe this is your department....

[dilbert]

Few things....

2 x Kcp-838 Kupo truss handcuff clamps new (200Kg) £10 each

Set 3 x RTI laser diode drivers... for red / green / blue each with TEC control - I don't know much about these but connections and pots clearly marked. They were salvaged from a projector with issues so I suspect one may have a problem and need fixing. I dont have time to play / experiment with these so sold as spares / repair to somebody to mess with say £30 set?

Nice 2U padded flight case - was used to house Powersoft amplifiers so nice and deep - dont really want to drag this along unless I get some interest so make me an offer and let me know. OK condition, sticker residue will need cleaning off top.

Attachment 30238
Attachment 30237
Attachment 30236
Attachment 30235

[Insanity]

PM Sent

15 characters

[soforene]

....Wishes he could think of a suitably pervy reply... Soferene, I believe this is your department....

I'm saying nowt.

Just gonna sit in the corner with my own big package.

big%u00252Bman.jpg