LASEVER new product: LSR532PL-TEC

[Lasever]

This Module is an upgrade for LSR532NL, especially nice for output 500mW to 800mW. (800mW is not included )


【LSR532PL-TEC】

size of laser head : 116(L)x34(W)x46(H)mm3

size of driver is the same as LSR532NL:
LSR-PS-I: 100(L)x58(W)x32(H)mm3
AC/DC PSU: 85~265V 50/60Hz input



The TEC cooling is more sufficient than LSR532NL.
So it is a better alternative for the conditions higher than room temperature.


【LSR532NL】



【LSR532PL】

The cooling side is insulated by nylon plates to keep cool.
The hot side has a second thermistor to monitor its temperature.






And here is the drawing



It costs usd35 more than LSR532NL

500mW LSR532PL-TEC is usd335/pc
600mW is usd385/pc
700mW is usd455/pc

[borgqueenx]

Whatabout its size?
And driver? Does driver produce less heat?

[Lasever]

Whatabout its size?
And driver? Does driver produce less heat?

add back the size .

size of laser head : 116(L)x34(W)x46(H)mm3

driver is as the same as the LSR532NL

[borgqueenx]

Wow that is really small. My compliments.

[Picasso]

I'm in for one.

[Lasever]

I'm in for one.

PM sent ： ） Please check

[Vidal Wolf]

Got a couple questions.
Are these designed for lab use(a quiet, stable clean environment?)
Or are they designed for the rough and tumble, bump and thump,smokey /dusty environment that a mobile DJ would be most likely to encounter?
Is the 700 mw unit just an overdriven 500 mw unit? or is the 700 mw diode driven by a higher power 808 diode?
What would you recommend I get? I would be using it in a rough environment (smoke/heat/vibration).
I would be building it into a tiny projector powered by 110 volts.

[Picasso]

I'll post a review when I get mine. Has to be built said about a week to build.

[Lasever]

Got a couple questions.
Are these designed for lab use(a quiet, stable clean environment?)
Or are they designed for the rough and tumble, bump and thump,smokey /dusty environment that a mobile DJ would be most likely to encounter?
Is the 700 mw unit just an overdriven 500 mw unit? or is the 700 mw diode driven by a higher power 808 diode?
What would you recommend I get? I would be using it in a rough environment (smoke/heat/vibration).
I would be building it into a tiny projector powered by 110 volts.

Hi, the 700mW use higher 808 diode.
And it's OK to work in a rough environment

But keep in mind, you need to add heatsink for it : )

[jayrob]

These are great modules!

I am offering the PL series modules in the U.S. for Lasever.

The PL series are different than the modules shown in this thread, and are suitable for hand held builds with no TEC...