Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: maXYZ module Dementions?

  1. #1
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default maXYZ module Dementions?

    Does anyone have the actual dimensions of the bottom of a maXYZ module? I'm making my own plates for the bottom so I can combine 2 of them and mount them to an optical breadboard.
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  2. #2
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    Anyone? Am I alone in wondering this?
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  3. #3
    Join Date
    Jul 2005
    Location
    Flying over a town near you
    Posts
    1,404

    Default

    Just buy them. Everyone needs at least 2 of them....besides they never give trouble.
    You are the only one that can make your dreams come true....and the only one that can stop them...A.M. Dietrich

  4. #4
    Join Date
    Mar 2007
    Location
    Rotorua New Zealand
    Posts
    528

    Default

    HI,

    I have just measured mine for you .. They are 77mm long by 46mm wide they are approx 30mm high. Caution the wire tail grommet is another 20mm long plus you may need to allow some more for the wires to bend around to wherever you want them.
    These measurements are for one unit excluding any mount or heatsink.

    Cheers

    Ray
    New Zealand

  5. #5
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    I have the modules, I need the measurements of the hole placement of the mounting plate.
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  6. #6
    Join Date
    Mar 2007
    Location
    Rotorua New Zealand
    Posts
    528

    Default

    What you needed to know and what you actually asked for are two different things..

    This is what you asked for..

    Does anyone have the actual dimensions of the bottom of a maXYZ module?

    I told you this in my reply.

    However,did you bother to say thanks or please or would you mind looking at the base plate no !!
    You know the nice things people usually do when asking questions of others.

    People here are very helpful to each other how about a bit of courtesy it doesn't hurt.

    Ray
    NZ

  7. #7
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    Im not sure of the placement, however the threads are 6-32. Screws were hard to find over here in the metric world
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  8. #8
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    Quote Originally Posted by Laser Ben View Post
    I have the modules, I need the measurements of the hole placement of the mounting plate.
    Perhaps you should use your ruler then
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  9. #9
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Lightbulb

    Yea, I thought of measuring mine, but it is firmly attached to a bi level breadboard that is inside my projector box. The screw holes are very hard to get to... dave's ruler idea is probably your fastest and best bet. Or you could PM marconi... He might know.
    Love, peace, and grease,

    allthat... aka: aaron@pangolin

  10. #10
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    Quote Originally Posted by Pitts View Post
    What you needed to know and what you actually asked for are two different things..

    This is what you asked for..

    Does anyone have the actual dimensions of the bottom of a maXYZ module?

    I told you this in my reply.

    However,did you bother to say thanks or please or would you mind looking at the base plate no !!
    You know the nice things people usually do when asking questions of others.

    People here are very helpful to each other how about a bit of courtesy it doesn't hurt.

    Ray
    NZ
    I'm sorry, I did not mean to be rude! If I was, I apologize.
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •