Norty's fund raiser sale

[norty303]

Some of you may know that I've decided to go motorbike racing this year, and as a result I'm having to find some money to cover the massive tyre bill for the year!

So I'm clearing out some odds and sods to see if I can get a few quid together.

Drop me a PM if you're interested in any of it. If you're interested in the lot them make me an offer.

1. 2pcs Stanwax external ILDA interface boards - 12V relay versions - SOLD

These were fitted and then subsequently removed from projectors before ever getting finished, so essentially brand new. They will need a 12V power source, not the usual 24V from the scanner PSU.




2. 2pcs Laserwave 640nm single mode dual red modules rated at 350mW - £100 for pair??

One of these worked fine last time it was powered up and gave over 300mW.

The other has a bit of a story. The PSU/driver broke so I ordered a new one from Laserwave. Unfortunately the new driver was wired for 2 diodes in parallel (the old driver had both diodes independantly driven) and everything to different pins, so it actually connected the TEC drive to one of the diodes! Some smoke and a burning Lasorb later, I finally managed to get to the bottom of what happened, and agreed that Laserwave would send a new diode and lasorb, and a new driver that could handle the parallel drive of the 2 diodes.

So, you get:
1x working head and driver
1x head with 1 blown diode and Lasorb
1x original style combined driver/psu that isn't powerful enough to drive both diodes in parallel, but is essentially brand new (and cost me about £80 I think)
1x new style driver
1x PSU for new style driver (both still wrapped in delivery bubble wrap)
1x copy of the email thread from Laserwave including all of the technical instructions on how to repair the head!

So a bit of a project if someone fancies it.




3. 2pcs CNI MGL-H 500mW 532nm DPSS heads - These are $300 still new from Goldenstar. SOLD

One of these works fine and over 500mW
The other went TEM10 and whilst i was adjusting it I managed to short the diode to ground. So basically needs new diode and aligning again.

Both will be supplied with appropriate PSU and any cables (I see one mod plug is missing in the picture)

[norty303]

If anyone wants to make sensible offers on any of this stuff, feel free to drop me a PM

[Bradfo69]

I'm in for the two Stanwax boards.

[norty303]

PM replied to!

In case there's any doubt that this is for a good cause, I did my first race weekend just gone, and in the Thunderbike Extreme Rookies (who run with the main Thunderbike Extreme class - max year 2002, max 130BHP, Power to weight ratio 1BHP:1.46kg or lower)
I got a 2nd and 2x 3rds, and in one race placed 10th overall (out of 32 starters)

So buy my sh*t, so I can afford some more tyres... please!

[Bradfo69]

Boards arrived yesterday safe and sounds. Thanks!

[epyn]

Need to talk about EU shipping costs for the greenies please.
PM Sent.

[epyn]

Greenies and the gift are here,thank You!

[norty303]

No problem, my pleasure - enjoy the 473