Some gears and testing for laser-ablating and -marking ...

[VDX]

... my latest (semi-comercial) project is a fiber-laser armed galvo-scanner used for "local ablating" of metal surfaces.

The core project isn't open, but I can show some images and videos of the common parts ...


- for a fast provisoric fixation of the fiber-laser head -- construction of a "3D-LOM-part" in Corel and export as HPGL:




- lasercutting the LOM-slices from ply-wood with a blue 3,5W-diode-module:




- assembled/stacked the slices and inserted holder for the collimator-head:




- mounted galvo-head:




- a video showing some testing on a piece of iron sheet:

https://vimeo.com/207474893


Viktor

[VDX]

... tested stripping black paint (development for cleaning metal surfaces):

https://vimeo.com/210773147


The result: - on the left a black tile -- on the right the black painted aluminum sheet (Dibond)




Viktor

[kecked]

what kind of laser wavelengths power....

[VDX]

... this was done with modulated CW-fiberlasers - 85Watts max power in the first post and 60Watts in the second, modulated with up to 500kHz, spot sizes around 30 microns ...

Hope to get a pulsed fiberlaser soon, with 20Watts averaged and 80 Kilowatts peak power -- should bite a bit more "agressive" in the material

Viktor

[VDX]

... actually assembling a more "professional" looking marking laser for an exhibition on saturday -- will post some more images and videos of the results later on ...








Viktor

[gn3481]

Beautiful work !

[VDX]

... thanks! - here a first image of the booth



Viktor

[dkumpula]

Very cool build, Viktor! That would be a fun tool to have around.

-David

[VDX]

... yes, some others thinks the same




... and here some of the "online" results:





Viktor

[VDX]

... and a video

https://vimeo.com/214409447

Viktor