Results 1 to 5 of 5

Thread: WTB: Laserscope Motherboard...

  1. #1
    Join Date
    Nov 2007
    Location
    SoCal / San Salvador / NY
    Posts
    4,018

    Question WTB: Laserscope Motherboard...

    ..Yep, you read that right: WTB (vs use for skeet shooting.. a Laserscope Motherboard - a Very Specific one: Must, and Only can-be, a "CB8-353_RevA" - Board info will be top right quadrant.. Info-ID looks like:

    Click image for larger version. 

Name:	CB8-353_RevA.JPG 
Views:	7 
Size:	114.2 KB 
ID:	52311 ..No other 'Revs' need-apply. Lemme know, Top dollar (relatively-speaking.. Paid for a working-unit..

    ..Come on, Ethan! Let's get that old Dino in yer garage, parted, and get that Radiator / HEx (..and Motherboard.. maybe? heading out here, and the ALE up to Rick, etc, etc.. It's not gettin any younger just sittin there, ya know..

    Lemme know, Thx.
    j
    ....and armed only with his trusty 21 Zorgawatt KTiOPO4...

  2. #2
    Join Date
    Apr 2007
    Location
    Costa Rica
    Posts
    523

    Default

    There are a few LS motherboards in the Irving Texas landfill...haha. Good luck!

  3. #3
    Join Date
    Nov 2007
    Location
    SoCal / San Salvador / NY
    Posts
    4,018

    Default

    Quote Originally Posted by Photonbeam View Post
    There are a few..
    Yes, but.. Were they Rev A's? Thx for the tip. I'll see if I can get the /pol kids on 4Chan fired up to locate me a couple, there, heh..

    j
    ....and armed only with his trusty 21 Zorgawatt KTiOPO4...

  4. #4
    Join Date
    Mar 2008
    Location
    lawton ok
    Posts
    91

    Default

    need help with getting my service mode..need pic of the jumper can someone send this pic ..i have a jumper in j31 that looks suspect lol

  5. #5
    Join Date
    Aug 2008
    Location
    the hills
    Posts
    983

    Default

    You still looking, Jon?

    Think I have one... Pretty sure

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •