Results 1 to 3 of 3

Thread: Help ild files in prg file kam energy sd300

  1. #1

    Default Help ild files in prg file kam energy sd300

    Hi all
    i seem to be only able to run 30 ild files in a prg file and thats with the ild file only playing once ?

    i need a couple of pointers please has im a newbe...

    1 how do a play more files
    2 can i add a pause / wait, delay command in the prg file
    3 can i get the ild file to loop / play more than once without adding multiple ild coomands i.e " clock,12,1 then clock,12,1" again and again
    4 what does what clock,"12","1" is 12 the frame rate and what does 1 do from what i can tell 12 draws faster ????
    5 what is the best software to design and write the files and create the show ??? "cheap software if any"

  2. #2
    Join Date
    Mar 2012
    Location
    Akron, Ohio USA
    Posts
    1,132

    Default

    If that prg file works like the ones I've seen before, the number 12 is the DAC clock rate, in other words how many points per second to show the file and the 1 is how many times to show the file.

    So to answer your questions, you should be able to show your clock.ild 3 times at 12KHz. You would use the line

    clock,12,3

    You can also use LaserBoy to create new frames and animations for SD card readers, but you need to know some things for it to work.

    James.
    Creator of LaserBoy!
    LaserBoy is free and runs in Windows, MacOSX and Linux.
    http://laserboy.org/code/LaserBoy_2017_08_06.zip
    http://theamerikans.org/LaserBoy
    Ask me about my LaserBoy Correction Amp Kit for sale!

    Either do or do not do. There is no undo!

  3. #3

    Wink

    Quote Originally Posted by james View Post
    If that prg file works like the ones I've seen before, the number 12 is the DAC clock rate, in other words how many points per second to show the file and the 1 is how many times to show the file.

    So to answer your questions, you should be able to show your clock.ild 3 times at 12KHz. You would use the line

    clock,12,3

    You can also use LaserBoy to create new frames and animations for SD card readers, but you need to know some things for it to work.

    James.


    great i was on the right path then,
    thank you very much for your help

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •