Digging out and clearing some stuff that may be of interest?
Hi all. Not posted for a while but do drop in periodically to see what's new..
Been going through boxes and found some things that may (or may not!) be of interest to anyone on here before I put them on ebay, so have a look and please comment on what you think any of these things may be worth these days, make an offer if interested :-)
Will be adding other stuff to the list below as I go through and ID it, I saw kinematic mounts, mini flex mounts, mirrors, prisms, collimators, diode mounts, PBS and other optics buried in boxes.
1x set of Eye Magic EMS7000's - New with 5mm aperture mirrors and a compact SMPS power supply.
These were bought about 5 or 6 years ago when I made Jems mini projector, I picked up 2 sets - one for his projector and a set for another project that never happened.
I unboxed and assembled these yesterday for the first time to run a quick test and make sure they are ok, and as expected they are fine. Fast and accurate scanning from these quality European galvos. Includes XY galvos, galvo block, amps, PSU, cables.
1x set pf PT20's - Brand new and still in the box. Includes XY galvos, galvo block, amps, PSU, cables.
1x set of PT30's - Used for just a few hours (less than 10) Includes XY galvos, galvo block, amps, PSU, cables.
1x Pangolin FB3 SE - Used Eval kit with LivePro
Not enclosed, Smartmedia, USB 2 mini, XY differential output board and DMX daughter board.
1x Lasever 532nm 800mW - New tiny OEM module with PS1 driver, data sheet, TEC cooled, tested and working >800mW
1x Lasever 532nm 800mW - New tiny OEM module without driver, data sheet, TEC cooled, tested and working >800mW - I'm sure I have another PS1 or NR driver here somewhere..
A little bit werrrr, a little bit weyyyyyy, a little bit arrrrgggghhh