ILD SÔS - Ilda Manupulation Tool Now Available

[polishedball]

you know you are like the only other member from mi that has a laser projector from what i looked around no one into lasers is in mi. to bad your one the west side...

think there is about a half dozen of us in Michigan gonna try to get a LEM going next year. http://www.photonlexicon.com/forums/...reat-Lakes-LEM

[NNA]

To the Future buyer of ILD SOS:
Author is quickly called back on questions, no problems to help, license key was also received after online-payment by leaps and bounds.
Greatly price for power functional.
The Program has seriously rescued me, for this too thank drlava for good work.

[clickamouse]

you know you are like the only other member from mi that has a laser projector from what i looked around no one into lasers is in mi. to bad your one the west side...

...Well, there's me in Ann Arbor and CD Beam in Monroe....Somebody in Brighton and a coupla others out there as well.
I wish you could search the PL membership for home states - or can you?

...Mike

[kiyoukan]

Hmm im in ann arbor most monday nights.
I go to the clubs down there.
But it would be nice to have a small laser meet in mi sometime.

[Jimboy3625]

But it would be nice to have a small laser meet in mi sometime.

http://www.photonlexicon.com/forums/...reat-Lakes-LEM

[Alexsnek]

drlava I can't open file DXF
Безымянный.JPG
In archive 3dmax file and my dxf file. Look at them

[polishedball]

It loads fine for me, your screen shot also says 1 frame loaded. What isn;t working? If your looking for some sort of animation out of it you need to export a frame for each move.

frame.jpg

[Alexsnek]

polishedball you used my DFX file?
Here that at me

[polishedball]

yep downloaded your link.

john

[Alexsnek]

All moved to disk C, it worked.

[NNA]

The Problem not in disk. I already pointed author to problem when load the files from folder, containing spaces and non-english letters.

[Alexsnek]

non-english letters.

This is my problem

[NNA]

Hi! Btw, no new versions since few months?

[drlava]

ILD SOS functionality is very close to what I imagined it to be for now. Recently I've been spending development time on LSX software, into which ILD SOS will eventually be integrated and expanded with drawing tools and other features. At least that's the plan. What would you need in an update?

[p1t8ull]

What would you need in an update?

Cylinder lenses

[NNA]

ILD SOS functionality is very close to what I imagined it to be for now. Recently I've been spending development time on LSX software, into which ILD SOS will eventually be integrated and expanded with drawing tools and other features. At least that's the plan. What would you need in an update?

Yes, of course.

1. Bug with paths, containing spaces and non-english letters.
2. Bug with crash on complexity frames.
3. Feature of batch saving emulator images.

[Alex_kld]

Hi guys!
the following happened:
I paid ILD SOS, all right.
After that, I received a mailr with link above to the program, and offer to bind the license or to computers, or to the DAC board. I chose a DAC card, I have QM2000, I sent a mail with request code 26.12.2011.
After that, waited for a letter with an activation code. And wait for him until now. Wrote a response to Mr drlava, here and across the PM is no answer.
Guys, PLEASE HELP ME get this code. held for 3 weeks.

[sbk]

DrLava seems always very busy, he may take a while before you get your activation code... That's "normal".

You should try to recontact him in a few days, don't worry he WILL answer but he's usually slow...

[LaserCot]

Hi guys!
the following happened:
I paid ILD SOS, all right.
After that, I received a mailr with link above to the program, and offer to bind the license or to computers, or to the DAC board. I chose a DAC card, I have QM2000, I sent a mail with request code 26.12.2011.
After that, waited for a letter with an activation code. And wait for him until now. Wrote a response to Mr drlava, here and across the PM is no answer.
Guys, PLEASE HELP ME get this code. held for 3 weeks.

The same problem...) after reinstall windows...ILD_SOS ask activation again...no response -from programm request and Andrew...Hope he will help us to solve this issue soon !

[kiyoukan]

Try getting a hold of him via the PL IRC its that chat button on the top of the page.
He comes in every now and then.
Just dont try to bug him to much he just had a kid not to long ago and stuff so he a bit behind.

[poult]

Hello! I'm looking for good tool for conversion from 3ds max + Illustrate to ilda files. I've tried Laserboy. What about Laserboy vs. IldaSOS ? Is last one better in optimizing numbers of vertexes? I have 30K galvo and not so good DAC (iShow). And all my attempts to get clear image in Spaghetti are unsuccessful. Illustrate renders so many vertexes and Laserboy converts them all. So I have havy ilda image. What about IldaSOS. Is it able to reduce vertexes amount?

[mixedgas]

ILDA SOS does optimized frames, Lasertoy does not.

Steve

[poult]

ILDA SOS does optimized frames, Lasertoy does not.

Steve

I do not agree. I've developed image in dxf. It consisted of 338 vertices and 169 segments as displayed by Laserboy. And I just saved it as ild file. Then opened it again in Laserboy.It displayed 227 vertices and 58 segments. I rechecked ild file in zIlda prog. It displayed the same result (227 points and 58 hidden lines). So Laserboy does optimized and reduce output ild files. But what will make IldaSOS. If it is 100 it's worth its money. Or It will make 220 points. Then there is no need to buy it.I can include dxf file and result ild file. But I don't know how

[masterpj]

I do not agree. I've developed image in dxf. It consisted of 338 vertices and 169 segments as displayed by Laserboy. And I just saved it as ild file. Then opened it again in Laserboy.It displayed 227 vertices and 58 segments. I rechecked ild file in zIlda prog. It displayed the same result (227 points and 58 hidden lines). So Laserboy does optimized and reduce output ild files. But what will make IldaSOS. If it is 100 it's worth its money. Or It will make 220 points. Then there is no need to buy it.I can include dxf file and result ild file. But I don't know how

Actually poult, what ildsos does and laserboy doesn't is make the spacing of the points perfect for laser display
Laserboy converts every coordinate, making it scenes with a very high pointcount then it should normally be.
I highly recommend ildsos, but you might need to be patient to recieve the license.
Depends on how buzy drlava is, I think he is still very buzy.

[drlava]

Hi, data reduction is one of the key benefits of ILD SOS that I've worked on. Combine that with the ability to see your optimization changes live, and you can get better images in 1/10 the time of other tools when using ILD SOS. I've emailed your download link, and look forward to hearing back!