Laser Stuff for Sale (Powermeter, Galvos,Spectrometer, Optics, Crystals) #2
Hello,
now i found the time to prepare a list of the items with prices.
I will post pictures and more details in this thread.
1x Zeiss Fiber Spectrometer 380-900nm (1100nm), with USB Electronic and Software - good as new 500,- Euro
1x Beamscan 1280, Laserbeam Profiler, 350-1100 - good as new 750,- Euro
1x Coherent / Molectron PowerMax 500D with PM30 Probe 650,- Euro
1x Coherent LM-2 Sensor 200,- Euro
1x Coherent 1000:1 Filter, up to 5W (for LM-2) 150,- Euro
1x Linos Digital Pulse Amplifier LIV 20 800,- Euro
1x TTI TGR 1040 1GHz HF Generator 800,- Euro
1x Tektronix P6701A 850MHz O/E converter (VIS) High speed Sensor 300,- Euro
3x LDX 630nm / 150mW Laserdiodes, C-Mount 75,- Euro each
3x LDX 640nm / 150mW Laserdiodes, C-Mount 75,- Euro each
1x OSRAM 650nm / 500mW Laserdiodes, C-Mount 200,- Euro
4x AOM ISOMET 1205C2 - new 125,- Euro each.
60x CT6800HPL Galvos 300,- Euro each
6x CT6200 Galvos 300,- Euro each
2x CT6210 Galvos 325,- Euro each
24x Mirrors 11x5x0,8mm for CT's, R>99% from 420-680nm - new 25,- Euro each
1x Gasfiber, 800µm Core, with SMA Connector 45,- Euro
3x Q-Switch, Gooch & Housego, 27MHz, 3mm 150,- Euro each
10x HR Mirror 1064nm, radius +750mm, d15mm (to compesate thermal lense) 40,- Euro each
10x OC Mirror 1064nm, R90%, flat, d15mm 40,- Euro each
10x Nd:Yag 4x51mm 0,6% AR/AR 1064nm 150,- Euro (for 60W high power DPSS)
2x Nd:Yg, von Litton, ca. 1,5 x 3 x 10mm, with Brewster, for Coherent 532nm Ring Laser 100,- Euro each
1x Nd:Yag 2x15mm 1% AR/AR 1064nm 125,- Euro
1x Nd:YVO4 0,5% 3x3x5mm AR/AR 1064nm 75,- Euro
1x Nd:YVO4 3x3x10mm 0,27% AR/AR 1064nm 150,- Euro
20X Pol-Cubes, 5x5x5mm 440-550nm 40,- Euro each
20X Pol-Cubes, 5x5x5mm 550-700nm 40,- Euro each
20x Achromate (VIS), Linos, f16mm, d8mm 25,- Euro each
greetings,
marco
Last edited by marco; 12-29-2009 at 13:37 .
Beamscan 1280 Laser Beam Profiler
Photon Inc. Beamscan 1280-CP, dual Scanning Slit Laserbeam Profiler with instruction manual.
Shows Beam diameter on display and profil on an external scope. Clip level is adjustable.
Nice unit, like new condition, readings are tested by a BeamScope System to make shure
the system is ok.
Wavelength: 340nm - 1000nm (1064nm)
Slit: #1 2,5µm x 1,5mm
#2 25µm x 3mm
Measurement rate: 10HZ
Zeiss Fiber Spectrometer
Zeiss MMS1 Fiber Spectrometer with USB Electronic and Software, it is not calibrated
but this can be done by a known source like lasers or a filter.
You will find more details in the attached datasheets
Coherent / Molectron PowerMax 500D with PM30 Probe
Coherent / Molectron PowerMax 500D with PM30 Probe (up to 30W / 50W short time)
Tthis item is in good working condition, we have compared the readings with the other powermeters we have here and the results
are more than ok. The picture shows the reading with a 21mW red diode laser.
LDX 630nm / 150mW Laserdiodes
Laserdiodes from LDX, 630nm / 150mW, 60µm, C-Mount
New with test and datasheet !
LDX 640nm / 150mW Laserdiodes
Laserdiodes from LDX, 640nm / 150mW, 60µm, C-Mount.
New with test and datasheet !
CT6800HPL Galvos
CT6800HPL high speed, high performace Galvos, new
small industrial version without connector,they come with pinout
but without mirros
Attached Thumbnails
Tektronix P6701A 850MHz O/E converter
Tektronix P6701A 850MHz O/E converter(VIS) High speed Sensor
for TDS Scopes, with case and manual - verg good condition
OSRAM 650nm / 500mW Laserdiode
OSRAM 650nm / 500mW Laserdiode, 100µm, C-Mount
with Datasheet and Testreport, new
Attached Thumbnails
CT6200 Galvos & CT6210 Galvos
CT6200 & CT6210 high speed, high performace Galvos, new
small industrial version without connector,they come with pinout
but without mirros
Attached Thumbnails
Posting Permissions
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
Forum Rules