have I read correctly that all ground cables should be connected together in a laser projector, including the ilda GND pin, signal GND cables AND GND from PSUs?
have I read correctly that all ground cables should be connected together in a laser projector, including the ilda GND pin, signal GND cables AND GND from PSUs?
suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.
Sometimes it's unavoidable tieing AC and DC grounds due to the way some PSU ground DC to chassis
Frikkin Lasers
http://www.frikkinlasers.co.uk
You are using Bonetti's defense against me, ah?
I thought it fitting, considering the rocky terrain.
I think ILDA published an article written by Bill B. from Pangolin years back. The article might be on the ILDA website.
You might be thinking of this: http://www.pangolin.com/resguide12.htm
Here's also a video demonstrating what can go wrong by connecting all grounds together: https://www.youtube.com/watch?v=Vm0GISQi9fE
LaserShowGen - Freemium Laser show editor and player: www.photonlexicon.com/forums/showthread.php/23004-ildaGen-ILDA-file-creation-tool
Helios - Low cost, open source DAC: http://www.photonlexicon.com/forums/...e-low-cost-DAC