|
IMGP3697
To mount the power supply this way you will need to trim some glue off the edge and trip the two switches.
Date: 02/25/2009
Views: 325
|
IMGP3691
To mount the power supply this way you may need to trim the glue and the two switches to allow it to mount flush (without damaging the switches)
Date: 02/25/2009
Views: 211
|
IMGP3702
One bracket three power supplies
The bonus of this is that it clamps the heatsink to the base plate to aid in cooling, also the power supply can be removed by loosening two screws and swapped out in 30 seconds
Date: 02/25/2009
Views: 247
|
|
IMGP3690
The bracket made from a strip of aluminium
Date: 02/25/2009
Views: 213
|
IMGP3688
Mounting bracket for the LW power supplies.
Date: 02/25/2009
Views: 184
|
IMGP3622
Abstracts 2
Date: 10/21/2008
Views: 241
|
|
IMGP3621
Abstracts 1
Date: 10/21/2008
Views: 226
|
IMGP3619
RGB tubes
Date: 10/06/2008
Views: 227
|
IMGP3617
White Light!
Date: 10/06/2008
Views: 224
|
|
IMGP3607
Looking up the optic path
Date: 12/02/2008
Views: 230
|
IMGP3608
Close up showing lasers and powr supplies
Date: 12/02/2008
Views: 257
|
IMGP3615
Looking down the optic path
Date: 12/02/2008
Views: 295
|
|
IMGP3606
Close up of the lasers
Date: 12/02/2008
Views: 224
|
IMGP3605
A shot from the side
Date: 11/05/2008
Views: 211
|
IMGP3603
Nearly completed layout. the layout is RGB from the left
Date: 12/02/2008
Views: 331
|
|
IMGP3604
Shot from another angle
Date: 12/02/2008
Views: 217
|
IMGP3620
RGB tunnel
Date: 10/21/2008
Views: 265
|
IMGP3616
White Balance
Date: 10/06/2008
Views: 223
|
|
IMGP3215
The mini USB hub that I plug the Mamba USB key into (saves me having to connect it to the laptop all the time, and from losing it)
Date: 08/28/2008
Views: 276
|
IMGP3203
Above the dichroic mounts
Date: 08/28/2008
Views: 259
|
IMGP3207
Another side shot
Date: 08/28/2008
Views: 253
|
|
IMGP3209
A shot of the inside front
Date: 08/28/2008
Views: 234
|
IMGP3210
A close up side shot
Date: 08/28/2008
Views: 216
|
IMGP3214
A shot showing the hinged cover, soon to have additional strengthening and key locks added
Date: 08/28/2008
Views: 213
|
|
IMGP3196
With the top open
Date: 08/27/2008
Views: 250
|
IMGP3197
Looking into the projector
Date: 08/28/2008
Views: 239
|
IMGP3198
From the side
Date: 08/28/2008
Views: 241
|
|
IMGP3199
My home made linear mirror adjusters, this allows me to adjust for the height of the laser to the centre of the dichroic filters
Date: 08/28/2008
Views: 220
|
IMGP3201
Another shot
Date: 08/28/2008
Views: 244
|
IMGP3195
Get ready for it
Date: 08/27/2008
Views: 229
|
|
IMGP3170
Almost finished projector - front - Running
Date: 08/24/2008
Views: 180
|
IMGP3143
Homemade linear mirror adjuster (I'll add more of the optics stuff soon)
Date: 08/19/2008
Views: 207
|
IMGP2923
Some initial tests - 2
Date: 04/27/2008
Views: 214
|
|
IMGP2771
Drilling holes in the side of the base plate for the case supports
Date: 01/13/2008
Views: 221
|
IMGP2763
Making the case supports
Date: 01/12/2008
Views: 211
|
IMGP2756
The design printed and overlayed on the base plate for hole marking
Date: 01/11/2008
Views: 234
|
|
IMGP3128
A view of the underside with everything mounted, you may notice I re-routed the wiring (I changed the Laser power supply to a larger 30amp model and had to re-route the wiring to accomodate it)
Date: 07/26/2008
Views: 258
|
IMGP3179
Some beam shots - 5
Date: 08/24/2008
Views: 226
|
IMGP3184
Some beam shots - 6
Date: 08/24/2008
Views: 209
|
|
IMGP3156
Some beam shots - 3
Date: 08/24/2008
Views: 228
|
IMGP3178
Some beam shots - 4
Date: 08/24/2008
Views: 201
|
IMGP3151
Some beam shots - 1
Date: 08/24/2008
Views: 219
|
|
IMGP3146
Some beam shots - 2
Date: 08/24/2008
Views: 225
|
IMGP3167
The whole unit on stand
Date: 08/24/2008
Views: 240
|
IMGP3160
Almost finished projector - right
Date: 08/24/2008
Views: 193
|
|
IMGP3162
Almost finished projector - back
Date: 08/24/2008
Views: 229
|
IMGP3164
Almost finished projector - top front - Lens cap off
Date: 08/24/2008
Views: 214
|
IMGP3166
Almost finished projector - bottom front - Lens cap off
Date: 08/24/2008
Views: 211
|
|
IMGP3159
Almost finished projector - front - lens cap on
Date: 08/24/2008
Views: 213
|
IMGP3161
Almost finished projector - left
Date: 08/24/2008
Views: 204
|
IMGP3135
An "upskirt" shot of the vent holes
Date: 07/26/2008
Views: 227
|
|
IMGP3061
Scanner mounting close up - 2
Date: 06/07/2008
Views: 261
|
IMGP3065
Scanners and Amps
Date: 06/07/2008
Views: 247
|
IMGP3105
Side plates made and fitted for size
Date: 06/28/2008
Views: 248
|
|
IMGP3107
Veiw from the front showing the air venting
Date: 06/28/2008
Views: 223
|
IMGP3131
A view of the the top (still incomplete)
Date: 07/26/2008
Views: 212
|
IMGP3133
A view of the front with lens hole and air deflector attached
Date: 07/26/2008
Views: 191
|
|
IMGP3059
Scanner mounting close up - 1
Date: 06/07/2008
Views: 199
|
IMGP3050
New blue Laser, Mmmmmmm - 3
Date: 06/07/2008
Views: 224
|
IMGP3056
We have blue!
Date: 06/07/2008
Views: 244
|
|
IMGP2913
Some initial tests - 1
Date: 04/27/2008
Views: 211
|
IMGP3041
New blue Laser, Mmmmmmm - 1
Date: 06/07/2008
Views: 222
|
IMGP3043
New blue Laser, Mmmmmmm - 2
Date: 06/07/2008
Views: 227
|
|
IMGP2805
All wired up
Date: 02/09/2008
Views: 248
|
IMGP2804
AC power board mounted - 2
Date: 02/09/2008
Views: 225
|
IMGP2778
View from the front (upside down)
Date: 01/13/2008
Views: 203
|
|
IMGP2780
Top view
Date: 01/13/2008
Views: 212
|
IMGP2790
Bottom view
Date: 01/23/2008
Views: 255
|
IMGP2796
Power distribution boards
Date: 02/02/2008
Views: 224
|
|
IMGP2803
AC power board mounted - 1
Date: 02/09/2008
Views: 198
|
IMGP2776
Bottom side components mounted - rear view
Date: 01/13/2008
Views: 218
|
IMGP2777
Bottom side components mounted - front view
Date: 01/13/2008
Views: 230
|
