Liconix HeCd

Page 1 of 2 12 LastLast
Non-working HeCd acquired in March 2009... and the process to revive it.

  1. AOM 1

  2. AOM 2

  3. AOM 3

  4. AOM 4

  5. AOM 5

  6. AOM 6

  7. AOM 7

  8. A look at the front of the tube showing the blue tint after the laser has warmed up.

  9. A look at the common Cathode showing the pronounced blue tint.

  10. A look at the full tube after warm-up. The colors are true to life. (Exposure time = 0.8 Sec).

  11. A look at the full tube after warm-up. The colors are true to life. (Exposure time = 0.8 Sec).

  12. A look at the full tube after warm-up. The colors are true to life. (Exposure time = 15 Sec). Note that the color of the reflected anomalies to...

  13. Power supplies showing supply current.

  14. Power supplied showing supply current. The Open-Loop light is constantly and rapidly blinking on-off.

  15. A picture of the front of the tube after warm-up.

  16. A picture of the front of the tube after warm-up.

  17. The feedback processor.

  18. The complete supply bank.

  19. The front of the power supplies.

  20. The back of the power supplies.

  21. This is looking at the front of the head. Honey-yellow color is due to this being soon after the laser was turned on. (exposure = 1/8 second).

  22. This is looking at the front of the head. Honey-yellow color is due to this being soon after the laser was turned on. (exposure = 1 second).

  23. This is looking at the front of the head. Honey-yellow color is due to this being soon after the laser was turned on. (exposure = 15 seconds).

  24. A look towards the back of the head showing the cathode, anode, and the HR mirror location. The colors are true to life. The bluish tint in the back...
Showing photos 1 to 24 of 36
Page 1 of 2 12 LastLast