Ilda line drivers and line receivers

Printable View

10-08-2012, 08:05
mixedgas

1 Attachment(s)

Ilda line drivers and line receivers

Attached is the ILDA recomended example schematics for ANALOG ILDA connector compatable levels.

Is Thank You Ware, You download it, you post a thanks.

Steve
10-08-2012, 10:29
-bart-

Nice!

I expected nothing more funky than that.
Although a reference to an appropriate agnd and dgnd topology could have been made.
10-08-2012, 10:33
mccarrot

thank you for sharing page 15, make me curious about page 1-14 :rolleyes:
10-08-2012, 11:31
mixedgas

Quote:

Originally Posted by mccarrot

thank you for sharing page 15, make me curious about page 1-14 :rolleyes:

And your not at least curious about 15-99?

Steve
10-08-2012, 11:33
mixedgas

Quote:

Originally Posted by -bart-

Nice!

I expected nothing more funky than that.
Although a reference to an appropriate agnd and dgnd topology could have been made.

There is a LOT of text that goes with this, including lumias, signal definitions, signal polarity vs beam direction, impedances, loads, protocols, specific types of Belden wire etc.

I'll dig up the digital one, no difference in grounds is mentioned...

Wait till you see the ORIGIONAL ILDA connector, its a big milspec plastic circular connector.

Steve
10-08-2012, 11:54
mccarrot

Need more laser lecture.... NEED MORE LASER LECTURE! O_o

Quote:

Originally Posted by mixedgas

Wait till you see the ORIGIONAL ILDA connector, its a big milspec plastic circular connector.
Steve

Yes I know, but this was also the time you needed to feed your laser water, else it would be mad and steam was getting out of his ears
10-09-2012, 03:25
no-esc

As always thank you Steve for sharimg your knowledge of us