i have two kam lasers laserscan 300 rgb and an ilink green can i master slave them together and use the master in sound mode
i also have a laserworld es-180s 3d, can they all be linked or not, basically what can or cannot
Printable View
i have two kam lasers laserscan 300 rgb and an ilink green can i master slave them together and use the master in sound mode
i also have a laserworld es-180s 3d, can they all be linked or not, basically what can or cannot
Master/slave on DMX usually only works with identical units that are designed with master/slave modes (not all have them), unless the fixture manufacturer produces a range of fixtures designed to work together (like some of the old Abstract lighting range).
If the iLink and Laserscan can be used together it'll say in the manual, otherwise you should assume not.