Printable View
Nice one Andy, how much did that set you back....did you get the pull out shelves?
£160 well the two aluminium shelfs are only screwed in, so yes
http://i80.photobucket.com/albums/j1...0120081072.jpg
http://i80.photobucket.com/albums/j1...0120081073.jpg
all the equipment that needs to be fitted :(
http://i80.photobucket.com/albums/j1...0120081074.jpg
Hi andy that looks top notch
im guessing that is mild steel ( apart from the shelves )
i would suggest that you get that stove enamelled Matt Black inside and out, that will minimise any stray reflections and stop rusting
Dont think about spraying yourself, as over time spray paint will start to flake and it will need to be de-greased properly
a great case mate ..... and it will be a 2 man lift when full :D
all the best ..... Karl
Dont think about spraying yourself - say again????Quote:
Originally Posted by Banthai
yes they told me to spray inside and out to stop rusting
its pretty heavy at the mo LOL maybe need 3 people to lift it, i hope my stand holds it
cheers mate
Looks like a very strong enclosure Andy
Karl's right, I would get all the apertures cut in now and drop the casing off to be stove enamelled or powder coated. Home painting is ok, but the other coatings are both more even and durable. Don't be tempted to get it painted at a car body shop either.Quote:
Originally Posted by andy_con
You can spray the ally base plates yourself with a good aerosol etch primer and matt/satin black.
.
honestly andy .... if you dont get it degreased proffesionally the paint wont key to the metal .... if small particals of paint flake off it can get into the scanner bearings and optics etc....
its a really great case.... but dont rush it now .... and as p1t8ull says get the apertures cut prior to the paint job. and you will end up with one of the best cases i have seen
all the best ... Karl
pffff powder coating!!!
i was gona use white spirt to clean then spray??