Printable View
Just break the glue with the screwdriver when you start turning. The pot might jump a little bit, but a 1/8 turn isn't going to kill you.
LF damping is mildly sensitive, and HF damping is moderately sensitive, but even 1/4 of a turn isn't going to cause serious problems if it slips. You may not even see 1/4 of a turn on LF damping unless you're looking for it. (You'll see it on the HF damping though.)
Andy: You've still got overshoots on your Y amp. Add some LF damping.
Adam
awesome, I'll set up my projector tonight (it was down to show some friends at work) and start tuning... I am sure I will have a few questions... and I am sure (but still knocking on wood) that one of the questions I have isn't how much a replacement would cost! :eek:
is this looking better
BEFORE
http://i80.photobucket.com/albums/j1...s/DSCN7269.jpg
NOW
http://i80.photobucket.com/albums/j1...0112007005.jpg
yes better but the circle is not round and you still have the Y axis overshoots marked red
the blue marked corners also look a little off but its hard to tell with the burn of the camera and the matching corners of the outer square look ok - if you have manual control of the camera try a quicker shutter speed, tho not too quick or you wont catch the whole scan.
Rob
according to this guide
http://www.laserfx.com/Backstage.Las...Scanning3.html
figure there should be osme over shoot???
ill try for better pics ;) just using my n91
thats as maybe - but not that much :)
R
Also it can really help if you turn some more lights on in the room, that way the laser wont over expose the camera so quick.
sorry like i say im just using my n91 ill try my n95 instead
ok did a bit more tuning??? if thats what u can call it lol
need to adjust the circile in the middle now
http://i80.photobucket.com/albums/j1...0112007008.jpg
http://i80.photobucket.com/albums/j1...0112007009.jpg
here we go the circle in the middle is looking much better
http://i80.photobucket.com/albums/j1...0112007815.jpg
http://i80.photobucket.com/albums/j1...0112007814.jpg