PF-114 RGV 300mW ILDA - anyone own one?

[riyalasers]

Xer0,
thank you for pictures and video,

Can you make some photos inside? (will be good to see quality of adjust devices... lasers and galvanometers mounts... their temperature safety...)

[Gadget]

Yes there ist always the brighter bluray visible on mixed lines, but its good centered. However, i dont know if its the sloppy drawed animations programmed in, or if its the laser himself. but circles arent really round, lines are not pefect straight, and its flickering like hell.
I would say its 15k at max but i have to test it with DAC and Testframe bevor making any final judgement!
Also the power dont seem like 300mW to me. can that be? but my brother's 15mW DX Greenie is brighter...

Have to get some of these intence sticks and make Beamshots the days!
Parts for DAC are on their way. this gona be a mad week

PS: Yes the black case is sweeet <3

Hey, I adjusted my scanners again and got a way better circle than the original. I turned the Blue diode driver board around the other way to make room for the X scanner(that driver gets in the way). Adjusting both looks like I got the horizontal/vertical pretty close. By the way when I got my unit I adjusted the RED positioning slightly to be center on the violet otherwise it was off and not making yellow correctly.

[Gadget]

Here are some random pictures with the smoke machine..

[ckilgore1]

Enjoying following this thread. My projector will be in hand tomorrow, but going to be tied up with something which will prevent me from having time to play with it until weekend. Damn, that's going to be tough.

[flecom]

I guess we could upgrade the scanners but I was hoping they were being truthful as I specifically asked them about the scanspeed! as for the output, Id say red and violet are weaker than green. violet beam is too fat to be any use by itself, just good for mixing.

well my friend purchased a 500mw green projector with "20k" scanners from miererlight on ebay and the scanners did the ilda test pattern fine at 20kpps out of the box and 24kpps after a bit of tweaking

[Gadget]

well my friend purchased a 500mw green projector with "20k" scanners from miererlight on ebay and the scanners did the ilda test pattern fine at 20kpps out of the box and 24kpps after a bit of tweaking

what control dac and software was he using? Might just me the ishow dac thats causing the problem, wont know for sure until i get my soundcard dac made.

[ckilgore1]

Have my projector in hand. Have only had time to plug it in and look at built in show. VERY HAPPY considering the price. I'm a very realistic person . . . did not expect a $1,000 piece of equipment for only $350. Haven't looked it over thoroughly yet, but is there no power switch? Do you have to turn off by unplugging? If so, not real happy with that. Also, wish they had spent an extra penny or two and used decent screws . . . tried to remove cover and got stopped on the second screw when I nearly stripped it (VERY FRUSTRATING). Again, want to emphasize that I'm very pleased so far considering the amount spent.

[Gadget]

Have my projector in hand. Have only had time to plug it in and look at built in show. VERY HAPPY considering the price. I'm a very realistic person . . . did not expect a $1,000 piece of equipment for only $350. Haven't looked it over thoroughly yet, but is there no power switch? Do you have to turn off by unplugging? If so, not real happy with that. Also, wish they had spent an extra penny or two and used decent screws . . . tried to remove cover and got stopped on the second screw when I nearly stripped it (VERY FRUSTRATING). Again, want to emphasize that I'm very pleased so far considering the amount spent.

Yeah I know what you mean, the screws are really soft eh. Try another screw driver. post some pics when u get time. I still want to know what the scan speed is for the scanners. The builtin demos look like they run slow. Usually the animations are more flashy than the simple animated lines. I notice with ishow overclocking the scanspeed to about 40k the flashyness goes away and is ok on the simple vector demos but makes more complex ilda frames look mutant!

[Xer0]

Did a shot with "Fake Fog" ... Hairspray.

( yes, its really not good for the lungs, were coughing a long time after it )

[Gadget]

Did a shot with "Fake Fog" ... Hairspray.

( yes, its really not good for the lungs, were coughing a long time after it )

LOL, make she u dont light a cigi up while doing that! maybe try some incense!