FS: Spacelas PT-ITrust + LCD-DMX + 15 volt Powersupply

[hobbybob]

Since i bought Edisons projector (see this topic http://www.photonlexicon.com/forums/...maybe-for-sale) and need the space in the projector for my Blue laserdrivers, i have no need the spacelas board with gobo's in CPU, standalone modus *soundactivated* and DMX support.

This board has an LCD panel with buttons so you can operate the laser standalone (has 128 Gobo's in it's own memory), sound activation. You can use DMX to control the "gobo's" aka cues that are stored.
Also it can be put in standalone modus reacting on environment sounds (nice for a bar ?)

Also a very nice breakout board with neat connectors to nicely wire your projector. That's the only sad part to see go for me ;-( since it looks great.

More info can be found here:
http://www.spacelas.com/html/pt-itrust.html for the board and here:
http://www.spacelas.com/html/lcd-dmx.html for the LCD control panel

For the lazy people here is some info:
Easy installed control board connected to scanning system and laser diode. Small size as 60mmX100mm to save room. The most important for it is that this board is with high quality and very beautiful Gobos inside the CPU.

TTL and Anologue diodes supported.

Electronic:
--- Voltage: DC +/- 15V ( can get from our scanning driver baord)

Description:
-High-tech compact two in one
-128Gobos in the IC ( CPU )
-24 channels DMX connector
-ILDA connector
-Sound connector
-Auto-work connector
-Address code connector
-Safety key connector
-Signal in/out connector
-Power / working status LED connector
-Intensity Blanking upgrade
-TTL&Anologue option connector
Size: 100mm X 60mm

and about the LCD:

This is our new product developed to replace the DIP-address.
LCD-DMX board, with DMX standard connector, nice outline, easy install.
-LCD screen display
-DMX standard connector

If you are interested PM me with a reasonable offer or to have questions answered you might have.
Selling this as a complete set: So PT-ITRUST, LCD-DMX and the powersupply giving +15 and -15Volt.

I am looking for an extra FB3 so if you have one left and are interested in this kit we might work out a deal where i hand over the Spacelas kit and some extra money ?

[hobbybob]

Bumpy bumpy bump

[badger1666]

hi do you know its output scan speed ??

[no-esc]

hi do you know its output scan speed ??

I may be incorrect but:

-In DMX Mode it drives my 20k fine.
-When ILDA is detected (aka plugged in) your DAC/Software then take over and this board is a feedthru.

v/r

Len

[hobbybob]

This board is currently installed in the projector i bought from Edison.
It was used to drive the Raytrack 35plus scanners and indeed did fine.
At wat scanrate the board outputs i will lookup for Badger in the manual tonight.
And indeed if you pull the ILDA cable out you can use it in Sound Activation.