Edison,
Did you made a pcb with sepperate 6A fuses to power the traco's?
(they just arived)
Senior Member
Edison,
Did you made a pcb with sepperate 6A fuses to power the traco's?
(they just arived)
Senior Member
This is possible. MCcarrot has designed a board for wiring the mains. I think its easy to implament this in the design Send me a pm with your Phone number i will go today to Mccarrot. He would call me when he,s going home so send me a pm
Senior Member
nice photos... always interested... waiting for my laser-parner response
Lorenzo from Italy
www.LF-entertainment.it
Senior Member
Just wanted to say I've been following this thread and really enjoyed seeing things moving along
Top job guys
Doc's website
The Health and Safety Act 1971
Recklessly interfering with Darwin’s natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.
Senior Member
You just wait untill we all meet up and give a EdisonLEMOriginally Posted by Doc
Just wanted to say I've been following this thread and really enjoyed seeing things moving along
Top job guys
Senior Member
Refreshments served by naked ladies at half time?You just wait untill we all meet up and give a EdisonLEM
I'm there.
Doc's website
The Health and Safety Act 1971
Recklessly interfering with Darwin’s natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.
Senior Member
Thanks Doc
Actuallu there is a new board coming up. Mccarrot is working at this at the moment. It is a connection board to connect everything in your projector to one board like scanners, scansafety, feedback from your scanners, ilda input, reset or start when power is lost from the grid and suddenly comes back again and interlock. The board has also 3 coloroutput connections and XY swap ( hopefully). But most important an ilda buffer so that your color output voltage stays 5v when using an fb3.My output voltage dropped when connecting the viasho modulation lead to the fb3. So if you want a proffesional wired projector and want to have maximum range of the analog modulation with using FB3 then this is it!!
I will call the company which is cuttting the aluminium tommorow.!
Last edited by edison; 04-08-2010 at 13:51.
Senior Member
^^^ I've been mulling over plans for exactly that board for some time now ^^^
It would take a lot of the hassle out of projector building, I would be interested in purchasing one of those for my RGB
Doc's website
The Health and Safety Act 1971
Recklessly interfering with Darwin’s natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.
Senior Member
I agree. This board would be very nice. I'm leaning towards getting one too. Now I just need the "R and B" to go with my "G"^^^ I've been mulling over plans for exactly that board for some time now ^^^
It would take a lot of the hassle out of projector building, I would be interested in purchasing one of those for my RGB
Senior Member
Maybe a good idea to incoparate 2 or 3 extra mains-out with fuses on that pcb.Thanks Doc
Actuallu there is a new board coming up. Mccarrot is working at this at the moment. It is a connection board to connect everything in your projector to one board like scanners, scansafety, feedback from your scanners, ilda input, reset or start when power is lost from the grid and suddenly comes back again and interlock. The board has also 3 coloroutput connections and XY swap ( hopefully). But most important an ilda buffer so that your color output voltage stays 5v when using an fb3.My output voltage dropped when connecting the viasho modulation lead to the fb3. So if you want a proffesional wired projector and want to have maximum range of the analog modulation with using FB3 then this is it!!
I will call the company which is cuttting the aluminium tommorow.!
In case someone needs a extra PSU or whatever.
Just my tought.
Posting Permissions
Reply With Quote