Groupbuy?

[edison]

Hello everyone

I called the anodisizer today and he will pickup the panels thuesday to be anodisized. It takes about a week to be anodisized so i think about 1,5 week the cases are going to be shipped.
I,m also working on a deal with a manufacturer to make some quality dichromounts and a quad setup in the near future :-)

[djlorenz]

nice work!

Ps: Johan, you have a PM

[edison]

Just to make it easy for you guys i made a list of what is needed to make your projector complete assuming you have a scanset and lasers a case and the ilda board from SRS.
i added that to the list also.



1 traco 5v/20 amps top 100-105 (farnell)
1 traco 12v/6amp top 100-105 (farnell) Only needed when using Viasho

Whats needed if building a proffesional rgb

1 Powerentry 10 euro (can be suplied by me)
3 dichromounts brass 51 euro ( can supplied by me if enough interest from groupbuyers)
1 high reflective mirror 7 euro ( can supplied by me)
1 keyswitch (can be supplied) 10 euro,s
1 AR coated window (edmund optics)
2 dichro,s reflect red and reflect blue (supplied by mccarrot )
high quality with little loss see topic :
http://www.photonlexicon.com/forums/...isation-thread

2 connectionboard from Mccarrot 35 euro,s (connectionboard and ac loopboard) ( supplied by MCcarrot)

4 neutrics farnell

Need parts and want to have everything in one shipment ?

Shoot me a pm

[Synce]

What type of Neutrik connectors do you guys plan on using?

[edison]

i prefer the original ones from neutrik.

[satje]

Just to make it easy for you guys i made a list of what is needed to make your projector complete assuming you have a scanset and lasers a case and the ilda board from SRS.
i added that to the list also.



1 traco 5v/20 amps top 100-105 (farnell)

Whats needed if building a proffesional rgb

1 Powerentry 10 euro (can be suplied by me)
3 dichromounts brass 51 euro ( can supplied by me if enough interest from groupbuyers)
1 high reflective mirror 7 euro ( If supplied by me)
2 dichro,s reflect red and reflect blue (supplied by mccarrot )
( high quality with little loss see topic :http://www.photonlexicon.com/forums/...isation-thread) (
2 connectionboard from Mccarrot 35 euro,s (connectionboard and ac loopboard) ( supplied by MCcarrot)

4 neutrics farnell
1 traco top 100-105 farnell
1 traco top 100-112 farnell

Need parts and want to have everything in one shipment ?

Shoot me a pm

First the link isn't working....

The traco top 100-112 is just needed when you use 12V or am i missing something?
I use one traco top 100-105 5V and two traco top 100-124 24V pos and neg.

Also needed would be the Keyswitch and a piece of AR-Glass.

[Synce]

i prefer the original ones from neutrik.

Gotcha. For color intensity control? USB pass-through (For us using FB3's)? I was just curious what knobs and junk everyone puts back there.

[satje]

Hey Edison,

Where do you order the "black inbus boutjes" and wich sizes are needed?
Just got me a Tabletop drilling machine, so i'm getting verry eager to get on with it

Greetings,

Ferry

[edison]

I have plenty of them in all kind of sizes. If you need them you can collect them when you pickup your case. So no worries. Also the panels are picked up by the anodisizer. And you can congratulate me because i sold all the 10 cases that where manufactured. The downside is that i don,t have one for myself. But hopefully with you guys posting some pictures of yoour projectors triggers enough interest to do this again.

[blowfly]

Sweet! Glad to hear the anondizing is done. Got any pics? Sorry to hear you sold your case. I bet there will be enough interest for you to do another run.

I'm about ready for a case! My interlock prototype circuit is working and I'm now translating it back to a schematic which I'll post pretty soon. Next step will be the color correction component, then scanfail.

Mike