I,m willing to do a groupbuy on for my case so that anyone her at pl has a good start for building there own Projector.The case is a splitlevel design so both sides of the baseplates are used. The case is 400mm wide , 300mm deep and 180 mm high and completely made out of aluminium to cool everything thats inside. It even has a bottemplate where you can mount three fans to cool the lasers.
After the cases are lasercut i need to make some aluminium strips to mount the lid so i have to do some work on it before i can ship it.The case comes in parts so you have to assemble it.The cases are blank but comes with black allenkey bolts with plastic caps underneat it so that if you spraypaint it in black you have a nice finish.I did in Heat resitive paint and then bake it in an oven at 180 degrees for 45 minutes to give that scratchresistive finish.Heatresistant paint does not efect the heat conductivity of the baseplate!
You can find out shipping because i will give you the weight of the package. Only if there are more then 5 cases ordered the groupbuy will procceed Details and pictures below.
The package that you ordered will contains the following items.
1 baseplate 10mm
2 sidepanels 5mm with ventilation gaps
1 frontplate 3mm
1 backplate with 4 spares for neutrics , 1 netentry and ildaport 3mm
1 topplate 3mm
1 bottemplate for mounting 3 ventilators of 92mm. 3mm
1 bracket to hang up the projector. 5mm
4 strips of aluminium to mount the toppanel.
bolts nuts etc to assemble the projector provided.
WEIGHT : below 10kg
Price: 250 euro excluding shipping. SRS has designed a ILDA pass true board for this projector. The netentry is available from Rob ( stanwax) If you want to build a projector exactly like mine that is possible. Shoot me a PM and i will send you a list of the parts you need for this case excluding the lasers!
As you can see i build in the FB3 and scanfail from gento.You can buy the scanfail from MCcarrot. If you,re patient i have a breakoutboard designed for this to connect everything on the board. On the board you only have to connect the following items: scanneramps , scanfail, colouroutputs, fb3 input, 24v+- I will post a picture from the board next week.
So anyone interested in this groupbuy?
Thanks!!!