I wanna see this affect. It starts 54 seconds in
http://www.youtube.com/watch?v=wFdmNom9xmE
Also i wanna try this this
http://www.youtube.com/watch?v=wKCHdQjQFH4
I wanna see this affect. It starts 54 seconds in
http://www.youtube.com/watch?v=wFdmNom9xmE
Also i wanna try this this
http://www.youtube.com/watch?v=wKCHdQjQFH4
Lasers
•405nm violet(blue-ray) laser-eBay I fixed it ya
•473nm 10mW LSR473NL series blue laser module www.lasever.com review
•488nm 5mW Novalux Protera DPSS Laboratory Unit
•532nm 5mW green laser www.elitelasers.com
•650nm 5mW red
Lasers
•405nm violet(blue-ray) laser-eBay I fixed it ya
•473nm 10mW LSR473NL series blue laser module www.lasever.com review
•488nm 5mW Novalux Protera DPSS Laboratory Unit
•532nm 5mW green laser www.elitelasers.com
•650nm 5mW red
ATM afaik-DocJohn and I have room for one more in our first floor suite-PM him if you want to share--we need a third for F/S and Sun nites. $33 per nite plus tax. $25 if we have four in the suite..... Len
I thought Mo (Daedal) was staying with you guys? Didn't he get in touch with you?
Adam
Do we have a "ballpark" schedule of events for the weekend?
Primarily, do we have "block times" set aside that the emphasis will be on actually running shows?
I know my other half, and possibly other guests, won't be that interested in hanging around during setup, presentations, etc., but will definitely want to see the shows. I may even have some other family members traveling from Virginia if we can lock in some sort of schedule for the shows.
![]()
RR
Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
1979.
Sweet.....
we run shows at these events?!![]()
Let me grab my calculator, ok.....4...98...7.....carry the 1.... Looks like were down to 8 days left!
I think it would be a good idea, but it would need to be as loose as could be. With 50 folks there, it's going to be a mad house. It kinda makes me wish we had a little more power in the sound department. What we have is pretty good, but it could be improved upon. I'm thinking at least two 18's an active crossover with sub out and an amp is all that would be needed to make a big difference over what we already have.Do we have a "ballpark" schedule of events for the weekend?
setting the drill press to ludicrous speed!
ahhhhh soooooo much to do!!!
still have to machine a bunch of stuff, drill a bunch of holes, wire everything, get the periscope installed on my other ML10 again since I had to steal the rail for my RGB... and my new scanners are on their way from Greece
the pressure is set to 11!!!!!!!