Does anyone have a driver / control circuit or know of a replacement for the lab style driver on a Viasho 532nm head. Also interested in pinout. Want to replace a VD-IIIA with a smaller circuit for use in PJ.
Thanks
Does anyone have a driver / control circuit or know of a replacement for the lab style driver on a Viasho 532nm head. Also interested in pinout. Want to replace a VD-IIIA with a smaller circuit for use in PJ.
Thanks
leading in trailing technology
Email Frank at Viasho with the serial number of the head. He can check if i will work with their PCB driver. These go for US$180 plus shipping. I asked about this the other day.
Cheers
Rich
Me too
I've been looking at the PicoDrive DPSS... But waiting on some more info before I buy.
Could you let me know if you get any info? I'll do the same...
Cheers,
Dan
- There is no such word as "can't" -
- 60% of the time it works every time -
Hi there
Well, what kind of information do you need?
Regards, Leander
Buy your drivers at www.laserparts.ch
I sent my questions to McCarrot, but he never got back to me with the manuals...
I'm *very* interested in the range of PicoDrives you sell.
1.) Can you send me a PDF manual for the RBLD PicoDrive; I can't find much information on how to use it. I would like to know detailed specs + connection diagrams before I buy it, to make sure it is suitable for my needs.
2.) Do you have an English manual for the DPSS PicoDrive? I've run the German version though Google Translate, but it's not a good translation, so I do not know if it is suitable for replacing a 1W Viasho driver with.
- There is no such word as "can't" -
- 60% of the time it works every time -
No, never got around to it...
The specs on the PicoDrive's look really promising![]()
- There is no such word as "can't" -
- 60% of the time it works every time -
Will do Ta![]()
- There is no such word as "can't" -
- 60% of the time it works every time -