Aixiz or ?

[rfourt]

What would you say is the best housings for the diodes?

Aixiz or ?
Dont know if there are any others=?

[Morgan]

What would you say is the best housings for the diodes?

Aixiz or ?
Dont know if there are any others=?

... or Meredith. Not used Meredith modules myself but they are another solution. Link - http://www.mi-lasers.com/cgi-bin/sho...s=diode_optics.

I find Aixiz to do the job so stick with them. I've got some if you needed. Some other lens options from them too, Glass Bluray AR coated, Red AR coated, etc... Some tests on LPF are showing Aixiz glass 405nm AR Coated are doing quite well at collimating for a cheap solution while a more specific one is found.

M

[smogthemog]

My build is going to be using 2 Meredith mounts

[andy_con]

My build is going to be using 2 Meredith mounts

you gone all eco jim using cardboard boxes as cases?

[Diachi]

Can the meredith modules accept standard lenses, IE the lens 27/aixiz?

you gone all eco jim using cardboard boxes as cases?

Ahaha!

[smogthemog]

I don't really know to be honest. You get collimating lenses with them which worked very well with the open can reds but I will have to wait and see what they are like with the 445's.

[Diachi]

I don't really know to be honest. You get collimating lenses with them which worked very well with the open can reds but I will have to wait and see what they are like with the 445's.

Right, okay.

[jaycey]

Ive got a couple of the laserwave brass modules, anyone know what size lens they take?

[robjdixon]

Can the meredith modules accept standard lenses, IE the lens 27/aixiz?



Ahaha!

No it is a different size I'm afraid.

Rob

[Diachi]

No it is a different size I'm afraid.

Rob

Right thanks ... looks like it's aixiz with Pats aixiz table mounts afterall .