Really interested in the 250mws.......
Keep us informed of progress, Marconi should really repeat the destruction test as the last one was destroyed by the refelction and thats not a true test. So you are right get him to crank one up......
Gold
Really interested in the 250mws.......
Keep us informed of progress, Marconi should really repeat the destruction test as the last one was destroyed by the refelction and thats not a true test. So you are right get him to crank one up......
Gold
Hi Gold,
Well, I wasnt happy with the performance of these diodes at 250mW..
Altho I did run them up as high as 300mW out..
Had to to figure where to run them.
But even at 250 they just didnt run well...mode hopped all over the place,
but prolly would do ok as a light source tho.
I did have great success running them at 150 to 200mW....
So., These are the diodes we will be using in the 130 to 150mW+
modules for now...
And as usual , I have one at 150mw+ and putting it thru hell sweeping the TTL pulses from a few Hertz up to 15khz ....
In another post I mentioned that I am waiting for a batch of even more
powerful diodes to show-up..
"My signature has been taken, so Insert another here"
http://repairfaq.ece.drexel.edu/sam/laserfaq.htm
*^_^* aka PhiloUHF
You know, I'm realizing that this forum is going to be bad on my pocketbook.
...it is...it is... but it's *SO* much *FUN* !!!
Responses always welcome...whether intelligent replies or smart answers