which have the highest quality,
dt40pro or scanlsp-30?
Senior Member
dt40pro vs scanlsp-30
which have the highest quality,
dt40pro or scanlsp-30?
I stopped selling scanpros becuase I had trouble with every set - have sold many times more DTs and not one problem/complaint from a customer. DTs also have 2 year warranty - even CTI don't match that.
Rob
If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
-----------------------------------------------------------------------------------------------
Laserists do it by the nanometre.
Stanwax Laser is a Corporate Member of Ilda
Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
www.photoniccleaning.co.uk
Senior Member
+1 on the DT's. Very happy.
The wide model of DT-40's is unreal!
90+ degree scanning? Yes please!
- There is no such word as "can't" -
- 60% of the time it works every time -
Perv!Originally Posted by danielbriggs
90+ degree scanning? Yes please!
get back to harvesting blues or ya know what I will send round!
Rob
If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
-----------------------------------------------------------------------------------------------
Laserists do it by the nanometre.
Stanwax Laser is a Corporate Member of Ilda
Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
www.photoniccleaning.co.uk
Senior Member
Not a clue.
Harvesting blues? Done enough of that...
I'm crying into a dead SSD at the mo
- There is no such word as "can't" -
- 60% of the time it works every time -
Senior Member
what´s the input beam height on the dt40?
Senior Member
DT40s are superb but, scanlsp`s are not scanpro or scaneco`s. DT40pro`s are a lot more that scanlsp`s so you would expect better quality. Dave from Lasershowparts did rate them quite well when they first came out, as did many other members here.
http://www.photonlexicon.com/forums/...ead.php?t=8660
Its down to how much you can spend.
DTs use the lowest block height Ive seen - 19mm to the X mirror. If you come in from the other side (reversing the axes) its about 26mm
Rob
If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
-----------------------------------------------------------------------------------------------
Laserists do it by the nanometre.
Stanwax Laser is a Corporate Member of Ilda
Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
www.photoniccleaning.co.uk
Senior Member
i´m not looking for speed
i´m looking for a workhorse
maybe some speed
i currently have ct-6810s but i only get them up to 16k
probably because of the large mirrors (9mm x 19mm)
Senior Member
how do i match the height with my spectra physics 168 or my alc-60
Posting Permissions
Reply With Quote
stanwax
