Mini-LEM Amersfoort - 30 january OR 6th of February

[borgqueenx]

i have a large assortment of "screws" with me tomorrow, if you don't want the casing just bring it along, we can recylcle the material

and assistence is what a lem, especially one like this, is all about.

Michel

got it, packing them now
thanks for bringing more screws

and okay il leave them here then. its to bad though that there is almost none interest in pointers on this forum

[michelrietveld]

got it, packing them now
thanks for bringing more screws

and okay il leave them here then. its to bad though that there is almost none interest in pointers on this forum

i have a nice green 250mw pointer but with several scanners around, what is the fun in a single beam.

[borgqueenx]

i have a nice green 250mw pointer but with several scanners around, what is the fun in a single beam.

ah thats nice to hear there is at least some interest.
well pointers are fun because they are portable. fun for skypointing and burning stuff.
but you are right we are busy with laser projectors. not projectors, and not lasers.

751 minutes remaining until it starts

[masterpj]

I cant wait
tomorrowwww

@hobbybob, on your mini-lem I accept free 3D requests / models / animations or maybe some small tutorials or explanations to give about 3ds max too ^^

[laserwinkel]

i probally aint gonna make it at 10 AM
got a last minute booking for a lasershow.

i'll try to be there around 12:00
packed everything already.

see you guys tomorrow "middag"

[borgqueenx]

I cant wait
tomorrowwww

@hobbybob, on your mini-lem I accept free 3D requests / models / animations or maybe some small tutorials or explanations to give about 3ds max too ^^

can you please make a 1:1 3d model of the netherlands?

il see you tommorow guys
if im to sick to go i will ofcource tell it in a reply to this topic.

but im doing better as earlier so i do hope to come over

good night now

[masterpj]

Random pic post


I expect some parts to flicker, it's not completely done and perfected yet (unneeded lines or miscolours) but I will fix that after or maybe even on the lem

[hobbybob]

Go to sleep already ! Just get better so you can be here.

Ok guys, i got groceries, so i have bread, cheese , ham, tostibread, cola, chips, cake, cookies, liquorice (drop), coffee, tea , sugar.

Finally i have cleaned up the room a bit, so we at least all can fit.

I will check with you tomorrow morning Boaz if you are going to make it, would be cool meeting you finally and help you with the start of your new projector!

Everyone else coming by car, please don't arrive too early as i am counting on picking up BorgqueenX from the station at 9.25AM. So i should return in time if the trains on time.

[masterpj]

Go to sleep already ! Just get better so you can be here.

Ok guys, i got groceries, so i have bread, cheese , ham, tostibread, cola, chips, cake, cookies, liquorice (drop), coffee, tea , sugar.

Finally i have cleaned up the room a bit, so we at least all can fit.

I will check with you tomorrow morning Boaz if you are going to make it, would be cool meeting you finally and help you with the start of your new projector!

Everyone else coming by car, please don't arrive too early as i am counting on picking up BorgqueenX from the station at 9.25AM. So i should return in time if the trains on time.

I will make sure I arrive a bit later then

I also got some stuff for boaz like his "gat zaag".
I had to look up a picture before I was sure I have alot of those thingies XD
My pc just had an upgrade but might need some tinkering with the RAM too
it works perfect though.

I just bought and installed: 4x 2GB 2200MHZ kensington DDR3 ram
(2 sets yes)
But it's not using its full power or near of the ram.
Might need to press a jumper which I will do a bit later on the LEM to reset the bios settings.
As it sees my 8GB but only has 2 DIMMS enabled.
Have latest bios version
have 64 bit and 64 bit cpu.
Mobo does support it.

I will go to sleep in a few minutes.

[borgqueenx]

I will make sure I arrive a bit later then

I also got some stuff for boaz like his "gat zaag".
I had to look up a picture before I was sure I have alot of those thingies XD
My pc just had an upgrade but might need some tinkering with the RAM too
it works perfect though.

I just bought and installed: 4x 2GB 2200MHZ kensington DDR3 ram
(2 sets yes)
But it's not using its full power or near of the ram.
Might need to press a jumper which I will do a bit later on the LEM to reset the bios settings.
As it sees my 8GB but only has 2 DIMMS enabled.
Have latest bios version
have 64 bit and 64 bit cpu.
Mobo does support it.

I will go to sleep in a few minutes.

Remember i dont need it anymore....

And hobbybob i will ofcource keep you up to date on events that may occur. 3alams has been set on my iphone and one on my dads bedroom clock.
7:15 i will be awake for this awesome day

I have fit everything in the case and a large travelbag.
Do i need a extra train ticket or how does it work? Its really alot of cargo.
I will bring:
Small aluminium plates.
Old outside aluminium cover of the old projector.
Laptop+charger+mouse+iphone charge cable.
Screws that fitted the best on the new galvos i want to install.
new galvo set.(unfortunatly not tunable because glue...phenix did this)
New pt-itrust set.
Money.
Iphone4.
Ipad.
2 laser protection goggles(one for pj one for me, reflective type, for last protection for your eyes only.....never know when you need 'em)
Manuals for installing new pt-trust and galvos.
Decoupeerzaag with spare saw.(i have no idea how to use it lolz)
Earphones for da train boreness.
LASER PROJECTOR.
I think thats it but i may be forgetting something.

I hope there are no thieves listening

Good night and im looking forwards meeting you all