I need help fello laser mates!(first big show)

[masterpj]

---

By the way, my fogger behaves desame. Its easily solved by plugging it in another power distribution box.Gladly they have alot of those at the wedding location.But yeah if my laptop and mouse and laser is on, and i use my fogger, the moment i release the remote button the speakers go off, the mouse freezes and the laser projector is suddenly unregonised hardware.

Sounds like indeed some weird static electricity.
try to ground the outside of the fogger somehow.
my fogger here doesn't do such a thing. it has to be the casing maybe you should block it somehow *don't cover the venting stuff!!!!!!*

[mccarrot]

. Use a smoke machine to fill that room with loads of smoke, so much that you cant barely see each other. Then when the curtains go open the smoke will drift into the room/building while all alarm systems are offline, and my assistant will blow in more smoke manually.

You are low on laserpower so a consistant haze is mandantory for a good show, too much smoke will limit the visibility of you beams.

Make sure you have a good fan in front of the smoke machine, clouds of smoke will ruin the picture, and all you will see is smoke and no lasers.

just put the area in a light haze 5-10 minutes before the show begin so the beams can easyli puch trough the haze and it will be visible eveywhere.

Too little haze is bad, but to much (thick) smoke will be even worse as this will completly block you beams.

[borgqueenx]

You are low on laserpower so a consistant haze is mandantory for a good show, too much smoke will limit the visibility of you beams.

Make sure you have a good fan in front of the smoke machine, clouds of smoke will ruin the picture, and all you will see is smoke and no lasers.

just put the area in a light haze 5-10 minutes before the show begin so the beams can easyli puch trough the haze and it will be visible eveywhere.

Too little haze is bad, but to much (thick) smoke will be even worse as this will completly block you beams.

yep thanks, 2 fans will blow all the smoke into the room, because the projector goes on about 10 secs after the curtain goes open. gives a good time to devide the smoke.
but i thought it would be cool to fill the stage behind the curtain with smoke for a nice mysterious effect

[colouredmirrorball]

yep thanks, 2 fans will blow all the smoke into the room, because the projector goes on about 10 secs after the curtain goes open. gives a good time to devide the smoke.
but i thought it would be cool to fill the stage behind the curtain with smoke for a nice mysterious effect

Try that with the Antari, I dare you!

(Hint: you will get sore fingers from pressing that button constantly for about 15 minutes with reheat times of course)

[borgqueenx]

Try that with the Antari, I dare you!

(Hint: you will get sore fingers from pressing that button constantly for about 15 minutes with reheat times of course)

i think 5~10 secs is enought to fill the whole stage with smoke. then when curtains open blow another 5~10 secs above the crowd and that will be enough for the whole show, i think.
i can always see for myself.

[colouredmirrorball]

I think it depends a lot on which smoke fluid you use. I get far better results with Jem than with the piss they sell at the local mall. Also Jem's fog liquid has a distinctive alcohol odor

[borgqueenx]

I think it depends a lot on which smoke fluid you use. I get far better results with Jem than with the piss they sell at the local mall. Also Jem's fog liquid has a distinctive alcohol odor

my fazer just died....now i have to use the cheap-ass fogger ONLY.
i have fair fluid that works fine. but a fogger is used for effects, not for smoke. i will do my best i guess :/

[colouredmirrorball]

LOL a fazer is just an upgraded fog machine with a fan. You don't loose any effect xD
I only use a fog machine but then I don't use lasers that much (since I'm scared of the combo self-built and audience scanning and also my projector is just crap atm) and I get good results. Just put a fan in front of your fogger and you should be fine. If you can separate it from the sound and light power lines, that is!

Oh and how good do you understand electricity? I mean, you know that outlets can be connected to the same fuse, right? Don't forget to check which outlets are connected to which fuses and make sure you separate sound from light.

[borgqueenx]

LOL a fazer is just an upgraded fog machine with a fan. You don't loose any effect xD
I only use a fog machine but then I don't use lasers that much (since I'm scared of the combo self-built and audience scanning and also my projector is just crap atm) and I get good results. Just put a fan in front of your fogger and you should be fine. If you can separate it from the sound and light power lines, that is!

Oh and how good do you understand electricity? I mean, you know that outlets can be connected to the same fuse, right? Don't forget to check which outlets are connected to which fuses and make sure you separate sound from light.

i dont understand alot of electricity but i dont need it tommorow.
I know that sound, smoke, light ect all need to be on different distribution boxes(maybe thats outlets, i used google translate). And that is not a problem in the room/stage where i'm going

so i just check in with the boss of the room wich will be present to ask wich outlets/distribution boxes i need to use to seperate my goodies.

and yeah i guess i can put a fan on the fogger :P thanks actually a good solution.

[masterpj]

i dont understand alot of electricity but i dont need it tommorow.
I know that sound, smoke, light ect all need to be on different distribution boxes(maybe thats outlets, i used google translate). And that is not a problem in the room/stage where i'm going

so i just check in with the boss of the room wich will be present to ask wich outlets/distribution boxes i need to use to seperate my goodies.

and yeah i guess i can put a fan on the fogger :P thanks actually a good solution.

No no let me help out here.
*people attention i will switch to dutch for a sec her*
Ooit in een stoppenkast gekeken?
bepaalde ruimtes/stopcontacten zitten aangesloten op een andere groep.
wat ze dus proberen te zeggen is dat je light en geluid gescheiden op 2 verschillende groepen moet doen.
dus zorg voor een groot verlengsnoer en doe dit

Afhankelijk van de ruimte kan de kamer op een andere groep zitte

What i was saying in dutch:
Ever looked in a fuse box?
Specific rooms/sockets are hooked up to a different group.
What they are trying to explain to you is that you have to keep light and sound seperated on 2 different groups.
So make sure you have a long power extension courd and do so

Depending on the location the room might not or will be on a different group