Dutchlem Ilpendam 2011

[colouredmirrorball]

Due to personal problem, I will not be able to come...very sorry for you mccarrot & friends

No problem, maybe I will try to drive there myself. In a car that is barely able to do 90 km/h on the highway Should be fun

Take care!

[cyberb0b]

I went to uniqlo in london looking for it this weekend and they don't have like ANY printed t-shirts any more! wtf!

Also, my laser doesn't need three phase or water... just 32A single phase 240 and (quite a bit of) space Still not 100% sure i'll make it, but i'll keep you guys informed!

I am sorry, there is no 32A 240v group available. Same goes for three phases

[masterpj]

can u give us a update.

who comes.
what can we see there ?
what can we buy there ?

Ik ga proberen te komen, maar wil graag weten of het de moeite waard is (that is dutch sorry guys)

laser greets joost
ps. for sale now for 2500 euro ex tax 3w rgb 635nm small round red + 1w green + 1w bleu perfect full color laser dt40 scanners!
Low cost high output power and perfect white see:
the middle laser (L & R are 2w Kvant projectors)
Attachment 28091

I'd say the previous Ilpendam LEM was a big success.
- The list who comes is on the first post in this topic.
- I think since francesco is there you can also buy pangolin, other then that: I dont know.
- You can see new lasershows or graphic shows (though I'm not certain if someone else other then me is really into the creating of graphics shows (especially when most of mine are 3D).
- You can see loads of pretty beams and ways people build their projectors (insides)

[LaserMike]

At day time i will also be present. My company is official Kvant distributor.
I will take a 1.6W kvant projector and a pricelist with nice discounts for the LEM.

And the most nice thing of the LEM is meeting other laserist and enthusiast people.
New beam and graphic shows are shown, i've seen some from PJ. He made some very nice shows!!

And just meeting people and have some nice conversations about lasers and stuff.

[hobbybob]

Hi Mike,

Looking forward to meet you (and all the other "new" faces i haven't seen before.
Interested in your company, didn't know there was an official Kvant dealer in the Netherlands ;-)
Furthermore i like talking about lasers as a hobby and doing shows.
I am not sure if i like if the LEM's to turn into some sales event.

Primary goal in my opinion is sharing knowledge, watching other peoples projectors and having fun, not making some money.
But it's always good to know where you can buy stuff when you need it.

@Colouredmirrorball: hope you can make it. And for all the other interested people, take a look here: http://www.photonlexicon.com/forums/...-between-UKLEM

[LaserMike]

Hi Hobbybob,

I thought we've already met. At the LEM 2010. I was there for one our or so.
Had an oppointment in the neighboorhood, so i stopped by when I was ready
And had to leave for an appointment in the evening. This year i can stay longer, but also leave in the evening for an appointment.

I totally agree with you that the LEM is for sharing knowledge, watching projectors/shows and have fun.
The LEM should not turn into a sales event, if we want to do that we make an exhibition and ask more companies to join, than we make some money.

[hobbybob]

Ah shocks man, sorry that i couldn't remember it!
A lot of people came by that day. And i have met a few in the UK also ;-)
But great to meet you again then ;-)

Looking forward to the meet very much! And also to what you bring ;-)

[danielbriggs]

Ok; plane tickets booked.
I can't bring anything projector wise...
I might throw a QM in the bag though.

See you all there!

[masterpj]

So about the projection zones:

Zone 1 graphics projector 1
Zone 6 graphics projector 2

Zone 4 Athmosherics projector1
zone 10 Athmosherics projector 2
zone 11 Athmosherics projector 3
zone 12 Athmosherics projector 4
zone 13 Athmosherics projector 5
zone 14 Athmosherics projector 6

(i would like to add)
zone15
zone16
zone17
zone18

4 projectors at the top (starting from zone 4 upperleft to right zone 12)
then underneath zone 12 zone 13 and then counting till zone 16 to it's left.
Then 2 projectors for the projection screen and 1 projector left (zone 17) and right (zone 18)?
Since I really dont have a clue and likely nobody really does on how we can place the projectors, but is it possible to get it setup something close to this so that i can more precisely make the multi projector beamshow?

The graphics are almost done, just 30 seconds left to create out of my 3 minutes of graphics

The show is for sale but the price is not set!

[masterpj]

You may also borrow my projecctor, it is not sure if i can take pangolin with me. (our company has a few shows that weekend)
But the projector you can use at day is a 1.6W RGB Kvant

Unfortunately, I have an appointment In the evening, so I can not stay all day. Arround 16u/17u I have te leave :S
Than i also take my projector to home, unless you want to buy it

Also interested in seeing your lasershow. It is nice music. Like to see what you made!

Is there someone with Beyond? Like to see that also...

I have beyond and I can show you it.
especially beyond 3D
My name is in the program for a reason

also 1 more week to go!