>2W RGBB DT40 pro WIDE MONSTER SERVER

[KGB]

I know that most people could build this for cheaper than Im selling I just wanted to test the water and hopefully find somewhere else to post this. I wish I could post it to the ILDA list but Im not a member
..... Anyone know a club that wants a plug and play super simple(lol) laser?





$10,000 and its yours. Read the whole description before you faint at that price..... :P
Not looking to part it out, just looking to unload it as is. The case and shipping(USA<$500) is included in that price.

...... consider What you get......

HUGE LT1000 clone case
1w 445 c@sio
250mw 473 LW
300mw 635
600mw 532 LW
DT-40 Pro Wide Scanners


The case is a beam table with 4fx, upgradeable to 16, operated by Dave's(LSP) 16ch DMX to TTL Card
MatILDA and DZ's Breakout Board are included along with 4gm-20's and DZ's GM-20 Drivers (+1 broken gm-20 and driver)

The case has EVERYTHING needed to apply for variance already installed. Key/interlock/stickers/led's/shutter/delay/etc

Now my favorite thing about this laser is all the extras I built into it...



LIGHTJOCKEY 2 comes with this sale and is built into the laser itself. An XLR port on the back of the laser is DMX out and anything plugged into that port can be controlled over the wireless network. I run all my stage lighting over wireless network. never again will you have to run a dmx line to the back of house.

Pangolin FB3 with LIVEPRO is also built into the laser and is connected to the wireless kit...meaning that you could control the laser wirelessly(not recommended) but even better is that you can use the cat5 plug on the back of the laser instead of a db25 cable run to your computer, making it super easy/cheap to run. (no break in or break out boxes needed)

This laser is ALSO a USB server with a USB port on the back of the case.....anything plugged into that usb port is available over the network.(wired or wireless)

I installed a FURMAN conditioner on the power IN line so you never have to worry about a power spike or damage caused by unclean power. This conditioner has a warranty to cover any damage that it didn't protect from.



Everything works flawlessly and the lasers don't have more than 40 hours on them.


Check out some of my YouTube videos to see what this beast can do......





< Before Power Upgrade



....or check out any video on my channel.... http://www.youtube.com/user/kgbisback

Any questions, or better ideas of where I can post this are appreciated.......

Thanks for looking,
-Brooks

[slicklasers]

One question: Does this ALREADY have a Variance # assigned to it?

[KGB]

NO Variance # attached

[Mr.Coffee]

..............

[Mindwaave]

That thing is seriously incredible... I have the money, but can't afford to spend that much at the moment
*sigh*

[hobbybob]

Watching the powers i cannot understand that it's called 2.5W RGB.
Al the powers combined maybe ? But certainly not balanced.
And 5W on the front is misleading ;-)

But for the rest a nice machine with lots of extra's built in.
Good luck with the sale !

[badger1666]

what usb server are you using in that ??
i am suprised you got one working properly no one else has , well not over 20kpps anyway
tell us more please

[norty303]

I'd be interested to hear anyone who has had one working full stop, for any reasonable length of time, including idles like you get in a show situation, using FB3 and QS/LP.

[KGB]

......its a little less than 2.5W total out......white out is definitely less than 2w :P.......THe goal was to take this to 5W when I got the case made, but that's now more $$ than I can invest now

Im using this USB hub.... http://www.belkin.com/IWCatProductPa...duct_Id=377025

[norty303]

And what has your experience been using that hub over the network?