High speed Galvo System ZR-V40 close-loop scanner
Appearance Picture:
Technical Data:
System: Closed Loop Moving Magnet Scanner
Input resistance:200K ohms, differential
Signal Input voltage:±5V
Input voltage requirements: +/-24V /1.0A
Operating temperature range:0~50 degrees C
Optical angle:±30° max
Scanner speed:>30Kpps(30k ILDA test pattern,±20°optical)
Mirror dimensions W*L: 7mm*12mm*0.85mm(wide wave-length)
Board size:8.4cm(long)*6.1cm(wide)*3.7cm(high)
The measuring procedure
The ZR-V40 was measured with PANGOLIN QM2000 card. Running at the desired output speed. Using the standard ILDA test pattern. Laboratory power supply at +/-24VDC,room temperature. Windows PC with Pangolin, 12/30k ILDA test frame,full size. 7x12x0.85mm mirror was used during measuring period. The galvos is fixed in the standard mounts on an aluminum base plate, no forced cooling.
Delflection angle Operating voltage Speed@Mirrors size
20 optical delfection +/-24VDC 40Kpps @30k ILDA , 7*12*0.85
Any advice or suggestion please contact alexhu through hzp7@163.com.Thank you very much.