This is in reference to what was previously discused on
http://www.photonlexicon.com/forums/...hp?p=3828#3828
depending on quanity, $1400 to $1600 including shipping or less. This is assuming not more than 4 or 5 are bought.
Pros:
-Analog Blanking
-Galvos not stepper motors
-Good airflow with filtered fans
-Color balanced extremely well
-Compact design
-Key switch with 2 keys
-400mw after IR filters installed
Cons:
-No IR filter on green or blue (over a watt of IR and visual wavelength combined)
-Cheaper dicros with estimated 5% loss per beam
-Dicro mounts need slight adjustment on arrival after shipping
-When pushed to around 20k the red blanking cant keep up, not a huge difference but noticable to the trained eye
-No shutter
-8 wire RJ45 plug on back requiring adaptor cable (i can make for a small fee or i will give scematics)
Pictures of unit are below. I will need some hosting to put videos out Keep in mind that the camera i make video with has a refresh rate that does not do well with lasers graphics so you will see flicker but you should be able to fill in the holes. The beam show videos are amaizing to say the least. I even brought out the big hazer for those videos.