Here's my latest effort. It's a H2 white light reflection copy of a H1 master transmission hologram. The nice thing about it is that the magnifying lens sticks out about 40 to 45mm in front of the glass, whilst the circuit board is just behind the glass.
If I was to make this again i'd use a slightly smaller lens with some sort of border around the edge to make it more visible. I'd also use a circuit board with slightly smaller components.
H1 master was a 7" x 5" film, Agfa 8E75D, CW-C2 developer and EDTA bleach. H2 is 5" x 4" film, Agfa 8E75D, Pyro developer and Acid Dichromate bleach. 20 second exposure using a 35mW 632.8nm HeNe. Both the H1 and H2 were made using a split beam setup.
Here's a video...
http://s660.photobucket.com/albums/u...t=478eabfc.mp4
Cheers
Jem