Laserparts

[Mifex]

Hello,

First i will tell you that i am new on this forum and my english is very bad

Because i have no time to repair my RGB laser i sell different parts of this system.

- Dragon Tiger DT40Pro scanners (complete)

- Blue 473nm 100 or 150mw (i think 150mw but i can't see it tomorrow when i am in the storage)

- Red640nm (min. 200mw)

- I Show lasersoftware

- Groene diode 532nm 100mw

- 3 quality dichromounts witch you can adjust in X-Y-Z (newprice with brackets 250 dollar)

The red diode is as good as new because i had a defect red diode. Connecticut lasers send me a new one (warranty) The new price was 450 dollar

I have the bills from the red diode and the dichromounts.

With this parts you can build a complete lasersystem. Its now working in a pufeng pf 115 casing but the green diode don't work good in this casing because a heating problem (in a few minutes the green diode is working 50% of his power). The laser works on ILDA. DMX mode is not working because the dmx board is removed.

So, the laser can be used but for the safety you must buy a safetyboard and the problem with the green diode must be fixed.

Greetz M

[Mifex]

A video of the laser http://www.youtube.com/watch?v=2eF2I5tczf4

[Mindwaave]

Welcome to the forum! What country are you located in? I might be interested in the DT40s and maybe the 473. How much for each one?

[cfavreau]

How much for the iShow and ditto on the country you are shipping from?

Thanks, Chris

[Mifex]

Hello,

I live in the Netherlands. The blue diode is a TTL module.

The new price for the dt 40 pro = 550 dollar (http://lasershowparts.com/store/inde...&productId=178)
The new price for the blue 773nm = 725 dollar (http://lasershowparts.com/store/inde...&productId=128)

So what you think $825 together?

For i show i want 150 dollar.

[nuphotonix]

er................ 150$ for Ishow? wow

[Patrick]

Hallo,

Zoals je kan lezen kom ik ook Nederland, ben ook net nieuw op dit forum.

Ik heb wel interesse in de Dragon Tiger DT40Pro scanners (complete).

Wat wil je voor dit setje hebben?

Ik hoor het graag van je.

Met vriendelijke groet,

patrick

[Mifex]

Hallo Patrick,

Jij ook welkom . De set mag weg voor 300 euro. Het doosje en alle onderdelen zitten er nog bij. Het scansetje is amper gebruikt. Ik wilde de laser repareren omdat het originele scansetje kapot was gegaan. Ik heb deze er toen in laten zetten maar diegene heeft ook de DMX, Safetyboard e.d. eruit gehaald omdat de scanneramps van de originele scanners hierop zaten. Dus na de 'reparatie' heb ik het apparaat nog steeds niet kunnen gebruiken en heb ik er alleen wat proefavondjes mee gedraait om software te testen en de kleuren af te stellen zodat ik een mooie kleurenmix kreeg.

Mvg

[hobbybob]

Hi Mifex,

I offer 75 euro for the 3 dichro mounts incl. the brackets.

Kind regards,
Dimitri aka Hobbybob (also from the Netherlands)

[mccarrot]

Looks like ebay here.

250euro for the scannners