Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Nicolaudie

  1. #1
    Join Date
    Jul 2011
    Location
    Rome
    Posts
    106

    Default Nicolaudie

    What do you think?

    http://www.nicolaudie.com/en/suite2.htm

    I got LSX and Fiesta.Net for laser shows.
    I would like to know what's the "best" software for light fixtures

  2. #2
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Default

    I have seen the Pangolin QM2000 used to run lights in addition to lasers.
    Love, peace, and grease,

    allthat... aka: aaron@pangolin

  3. #3
    Join Date
    Dec 2006
    Location
    denver,co
    Posts
    1,078

    Default

    Ld 2000 is a poor excuse for a lighting controller. It is fine to trigger a smoke machine or a strobe but you would not want to do any kind of performance with it.

    That link looks ok as far as pc lighting controllers goes. I prefer lighting desks, depends on what you are trying to do.

    chad


    When the going gets weird, the weird turn pro.


  4. #4
    Join Date
    Feb 2010
    Location
    Melbourne, Australia
    Posts
    1,106

    Default

    Try Freestyler. Norty here on PL is a user.

  5. #5
    Join Date
    Jul 2007
    Location
    Knoxville, TN, USA
    Posts
    3,154

    Default

    Enttec DMXIS...
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

  6. #6
    Join Date
    Aug 2011
    Posts
    39

    Default

    Sunlite Suite 2 is very good. Download it and play around with it. I have not experienced a time yet where the software did not have the capability to do what I needed it to do.

    If you have any specific questions about it's capability shoot.

  7. #7
    Join Date
    Jul 2011
    Location
    Rome
    Posts
    106

    Default

    Quote Originally Posted by Mikey851 View Post
    Sunlite Suite 2 is very good. Download it and play around with it. I have not experienced a time yet where the software did not have the capability to do what I needed it to do.

    If you have any specific questions about it's capability shoot.
    Yes, I downloaded it.

    It has a beautiful interface, Microsoft.Net style, like Office.

    I would like to see this type of interface on LSX and Fiesta.Net too.

    It's really simple to use and powerful.

    On Facebook Nicolaudie guys told me that have few ideas to develop a software for ilda lasers.

  8. #8
    Join Date
    Aug 2011
    Posts
    39

    Default

    Ohh that would be sweet if Nicolaudie did that. Although I'm loving Pangolin Quickshow right now. It would just be cool if Nicolaudie had an add on ILDA software for SS2 so that you could have all of your lights and lasers running on the same timeline and in the same scenes.

  9. #9
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    9,890

    Default

    You know some Pangolin products have a DMX input, right?

    Steve

  10. #10
    Join Date
    Aug 2011
    Posts
    39

    Default

    Quote Originally Posted by mixedgas View Post
    You know some Pangolin products have a DMX input, right?

    Steve
    Yes......I haven't tried it yet though. Plus I really like the Quick Show interface for controlling the lasers. Do you have any experience with controlling Pangolin through DMX?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •