How big is your laser projector and how much total power?

**borgqueenx** · 10-02-2011, 04:52

Im doing a bit research how small laser projectors can get with their powers...because alot of power requires big modules..at least most of the time.
My soon to be 2.2W will be 34x44x16.5cm including the outside wood.

How big is yours?

**Stoney3K** · 10-02-2011, 05:16

Originally Posted by borgqueenx

How big is yours?

And you SERIOUSLY expect us to answer that?

**sbk** · 10-02-2011, 05:17

My next project (currently in design) will measure 380x342x270. It will have first only a 8W 532nm (2x 4W modules), but I planned enough room into it to become a 14-15W RGB later

(with 5W 638 and 5 or 6W 445).

Tricky part when having big laser output is the cooling part, you really have to take care about it, so it take a lot more room...

**borgqueenx** · 10-02-2011, 05:28

Originally Posted by sbk

My next project (currently in design) will measure 380x342x270. It will have first only a 8W 532nm (2x 4W modules), but I planned enough room into it to become a 14-15W RGB later

(with 5W 638 and 5 or 6W 445).

Tricky part when having big laser output is the cooling part, you really have to take care about it, so it take a lot more room...

that size is in cm or mm?

@stoney: LOL i could have been expecting that.

**masterpj** · 10-02-2011, 06:13

borgqueenx 2.2 watt balanced or unbalanced?

**dnar** · 10-02-2011, 06:16

Chinese watts or Western watts?

**Anthony** · 10-02-2011, 06:46

Originally Posted by dnar

Chinese watts or Western watts?

What is the difference between WESTERN watts and CHINESE laserwave (bridge) watts?

**borgqueenx** · 10-02-2011, 07:07

Originally Posted by Anthony

What is the difference between WESTERN watts and CHINESE laserwave (bridge) watts?

i think he ment if the output power is real or exaggerated.

i mean 2 watts of real power

PJ: balanced, of cource.
650mw of 445nm.
550mw of 532nm.
1000mw of 650nm.

**dnar** · 10-02-2011, 07:20

Yeah, kind of. Most exaggerate, not all do though.

I have found CNI always over-deliver.

**Anthony** · 10-02-2011, 07:24

So chinese power is always exagerated?
There seem to be alot of china bashing on this forum lately.

5 years ago we all were quite happy using chinese products in our projects.
Laserwave and CNI had great reputation....

Laserwave always delivered more than stated on the speclist...
IR filtered.....so that should be real power.

Thats why i asked the question....
Maybe i missed something about chinese laser in the last 2 years when i was out of the hobby.

Thread: How big is your laser projector and how much total power?

Thread Tools

How big is your laser projector and how much total power?

Posting Permissions