New EYEMAGIC Scanners EMS7000

[Solarfire]

Tom said me a 3.8mm aperture is meaning there will be no spill on the beam at maximum deflection angle. So if your beam is <=3.8mm you can go for the smaller mirrors without problem!

What he said..Yeah.. that was the first question I asked Tom since I have a max 3.5mm beam to deal with.

[sbk]

Well, 3.8mm is more than enough so.
But, have you thought when you will decide to upgrade the power of your lasers and put 4W of 638nm??

[Solarfire]

Well, 3.8mm is more than enough so.
But, have you thought when you will decide to upgrade the power of your lasers and put 4W of 638nm??

I don't intend on putting 4W of 638 on these scanners, probably max 2W with a max 4mm beam. I can live with 0.2mm of spillover. I just don't want to slow these babies down in any way.

[sbk]

Hehe, was just a joke Anyway the free room inside your projector would be the first issue...
This being said, they're still making 60k @6° with the bigger mirrors (instead of 10°), I think I can live with this

[sbk]

This makes me thinking about power supplies now. I choosed this one, I hope I made the right choice... Did you guys already choosed yours?

[chad]

To me that looks like a great supply.
It is compact
180 watt (way over kill)
Has some nice big caps on the output. Good for transient current spikes, like galvos tend to generate.

An audio amp power supply is ideal to run galvo servo drives.
and best of all, it's cheap!

chad

[planters]

I have been attempting to e-mail Tom @ Eye Magic for several days and the address comes up as invalid. Before I can participate in the group buy I want to confirm mirror size options. I need some way to confirm this with Eye Magic.
Thanks

[sbk]

Send me your email adress by PM and I'll send you the pricelist with mirrors size option!

[logsquared]

Can you PM me the list as well. TIA.

[sbk]

Please PM me your email adress and I'll send you the PDF pricelist... I tried to copy-paste it by PM but it comes out not readable as there are a lot of tabs.