DZ ILDA Breakout Board (3rd Generation)

[Elektrotechniker]

Same here. hehe nice to have something related to PL in any way.

the level of workmanship in these is simply breathtaking!!! aaaaall that soldering!!!! o h!
thanks so much DZ!

it makes me feel all warm inside having a small pcb that reads "www.photonlexicon.com" on one side of it (plus the ilda pinout ledger on it, nice one that is! i'm sure i'll find it usefull one day on the field, despite that i am already starting to memorize it)

[Elektrotechniker]

I'd like to report that I am too experiencing this issue.

@ DZ, which pins should I bypass, so that I get a fixed image that ca be inverted through the laser software only? That could be you finest help at this point. The ~$2 are yours, since the rest of the board is working like a charm overall

[DZ]

I'd like to report that I am too experiencing this issue.

@ DZ, which pins should I bypass, so that I get a fixed image that ca be inverted through the laser software only? That could be you finest help at this point. The ~$2 are yours, since the rest of the board is working like a charm overall

Hi Silvershot, I've attached a pic showing the invert pins jumpered. If the jumpers are on the top 2 pins (Y), then the signal from the DAC is normal, if the bottom 2 pins (X) are jumpered then the signal is inverted.

[Elektrotechniker]

Thank you for the fast response.

Hi Silvershot, I've attached a pic showing the invert pins jumpered. If the jumpers are on the top 2 pins (Y), then the signal from the DAC is normal, if the bottom 2 pins (X) are jumpered then the signal is inverted.

[edison]

Nice i like the x and y swap feature so perfect for my next project. I will order some soon you can count on that.