Full color projector with 635nm small beam red yeahhhhh :-)

[RGB LASER VERKOOP]

output power:
600mW 635nm
1400mW 532nm
950mW 445nm

enjoy:

Attachment 29949

[masterpj]

You might want to give details like mrad of each module.
And more info about the scanset (max angle, scanspeed, ilda test pattern and at what angle)

[kiyoukan]

Please better pics with specs would be great.
looks amazing.
Sambe beam size so then a 1.4W green has a divergence of over 1.5mrad form the ones i have seen so then you have a 1.5mrad red with maybe a 3mm beam?

[RGB LASER VERKOOP]

The red measures 1.45 mRad
The best I could do on the red for the above divergence was ~4.5mm X 4.25mm at aperture.

it is a nice match with the 532nm CNI laser
and the bleu use a prism paire for nice round beam.

:-)

[kiyoukan]

what lense were you using? you should have been able to get a laser with around 4mm with a 1.1
or did you match it to your green?

[RGB LASER VERKOOP]

Attachment 29950
Attachment 29951
Attachment 29952
Attachment 29953
Attachment 29954
Attachment 29955

it is match for the cni green, same beam hight and dot at 65 feet allmost same size!

[swamidog]

round?

(looks again)

this is what a round 445 dot looks like.

and the bleu use a prism paire for nice round beam.

:-)

[Laser Wizardry]

" 15 characters"

[swamidog]

did you fc the petite death star?

Now maybe I was born yesterday, but I think this is what a round 445 nm beam looks like when it is actually round. Sorry for the bad picture, my camera does not like 445 very well.

Cheers

[masterpj]

Joost the first picture looks like it was RGV because the violet is never like that with RGB (picture with the bee), was that an older picture?