Jr. Woodchuckington Janitor III, Esq.
the quad module you sold me was missing the aperture, so it's something i pay extra attention to.
Originally Posted by edison
hahaha so so you noticed? I thought lets ad a blank one and see who is the first who takes the biteBut thanks for the advice
suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.
Senior Member
glad to help and if you need something or need help with anything just send me a PM.
Last edited by edison; 07-03-2012 at 10:51.
Interested in 6-12W RGB projectors with low divergence? Contact me by PM!
Jr. Woodchuckington Janitor III, Esq.
no problems and i appreciate your excellent support.
suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.
Senior Member
I have the Knobs to fit on the front if you want one let me know
Interested in 6-12W RGB projectors with low divergence? Contact me by PM!
Senior Member
Sexy photo some posts up edison
Curious at cost for such a baby.
Im already getting 1.8W of 637nm so no need but still youre modules have perfect size and mrad^^
You are unique! Just like everyone else...
Mum: What do you want for breakfast? Me: Lasers Ofcource!
Senior Member
Just finished a new module for a customer well actually 2 quads combined and after combining they are doing 1100mw/637. Damn bright if you ask me. The beamsize is 18mm somewhat at 26 meter and 5 mm at aperture so about 0.5mrd. They will fit the larger 7mm x 12mm mirrors. It was quite allot of work to get them done but i,m happy with the result
Soon to come is a new driver on top of the module and the tecdriver that will be mounted on the inside. The driver on top of these modules is a single driver with tec but i reallised this is not practical when having an RB module Like Rizard has.
The next step will be the introduce a new Projector and a standard telescope on blue and red modules.
Enjoy the Pictures
Interested in 6-12W RGB projectors with low divergence? Contact me by PM!
Mine didn't have aperture holes either.
I AM curious about that knob on the front though. How much would one of those run to put on one of my exisiting modules? I'm guessing it's some very fine drill and tap work.
Thanks in advance!
Senior Member
I have 50 of those lying arround. Just to be clear a KIT is a DIY thing and so the hole needs to be drilled after determination where the beam comes out. If you want such a Knob and a Lasever driver as a spare for your blue send me your adress and i will send it to you for free. Look at it as moral support for building your projector
Interested in 6-12W RGB projectors with low divergence? Contact me by PM!
PM sent - and thanks!
Hi Edison,
Just following up on this, as it has been about 6 weeks. Do you need me to send the address again?
Thank you! (And more pictures of the projector will be posted soon.
Posting Permissions
Reply With Quote
Bradfo69