1 watt blue module

[hivelaser]

Just a little comment on the projector, if you ever did laser shows for a living i mean running it every Thu, Fri, Sat, Sun for 4 - 8 hours it wont cut it, the cooling is way bad, in the clubs, venues there is so much air dirt that in a month your projector will look really dirty on the inside and the outside, also if it is a fixed installation will be less then that...

[edison]

Thanks for your input but from what i remember i didn,t sell you the latest version of my case. The case has gone true quite some changes like different struths for example. The panels are sliding into the struths so it closes the case and you don,t need screws to bond the panels together. I will post a picture when i can find one I also have dust covers and i use 3 fans of 92 mm at 12 blowing directly on the baseplate to get rid of the heat. This is my 4th revised design. The new one will have all the holes in the baseplate pre-drilled and tapped and also the drivers for the scanner amps will moving to the lower compartment. Because my blue and red driver works on 12 V and also the new green driver i only need 1 powersupply instead of 3.

Text revised

[StarryEyed]

Hey,

The Driver shown in the Picture is the new dualdriver from badpip?Still in development?

StarryEyed

[hivelaser]

I never bought a case from you, i think you mistake me with someone... and i never did a group buy for a case... sorry . This is just input for you to consider... but i guess people take input the wrong way...

[edison]

No the driver you see is developed especially for my design. The great thing is that the Thomas Edison Dual Drive works on 5v also for blue diodes. This means it will putt out 1 watt of blue on 5v. It can work between 5v and 12v input and has 3.5 amps per channel. This driver will not be for sale seperately and is only used on my modules. I have spend quite a som of money on the development to support Thomas with his development of his projects like his projectors , quad drivers, tec drivers and other developments. This way it helps us both. The funny thing is that i never met him in real life but it will happen in may when he is coming over for the lem. He also developed a powermeter that can be connected to the modules to measure temperture and power at the same time. So much going on behind the scenes. By selling modules i can buy drivers so that the development train keeps going. His Quad driver is excellent for hobbyist who want to build a quad stacking system. I have used it a couple of times with 4 watt blue,s and they work perfect

[edison]

Damn yes your right I,m man enough to say that i made a mistake. Mr willing did the groupbuy. How could i mistake you with MR willing? your names are not even look the same. Sorryy for the mistake man. The case that you have is an old version the panels slide now into the struths so no screws are needed to bond the panels together. Sorry for the mistake i will change the earlier post