Laser Inventory [what lasers do you own?]

[allthatwhichis]

My line up has changed dramaticly since my fist post above...

140mW 405 daedal wdie4drives+, 4x@75mW, 6x@100mW, 140 after cube
100mW 473 Laser Wave
100mW 532 CNI
300mW 660 MechEng3 wFlexmods, 2x175mW, 300 after cube

130mW 657nm Maxyzmodule
4mW 632nm JDS HeNe
2mW 594nm PMS EO HeNe
100mW 405nm DZ wrckstr handheld

[trwalters001]

1 watt Viasho 532nm
400mw dual MaxYZ 660nm
200mw Laserwave 473nm
5mw Jasper 532nm pointer
5mw Metrologic HeNe 632.8nm
lots of <5mw 650, 660nm pointers

[flecom]

holy bump from the past!

[oliverst14@hotmail.com]

all my lasers that are ilda contol are listed in the bottom of this post but i also have 4 shinp dl 11s and a star cluster laser for smaller gigs
after completing the rgb im planning on getting 2 empty laser cases with everything in except the diode and installing a 1 watt green diode from ct lasers (great guy good prices great diodes)

cheers ollie

[ionlaser555]

Hi


Ive only got

1x 100mw dpss green
2x 250mn 650nm red

Both are laser wave

(need to get more)

EDIT: now have 2 watt diode (NIR) and a 3 watt diode along with 15 other 1-2 watt diodes.

[colouredmirrorball]

probably shortest post in this thread:
-1x 40 mW green cheap Chinese projector (DMX)
-1x 300 mW (so was I told) 635 nm currently doing nothing else than lighting matches, will find a friend for him soon (probably a 100 mW green)

[GooeyGus]

Oh god I dont even want to think about it....

SP 164 - argon (with another two or three on the way.... I dont know where I'm going to put these things...)
SP 165 - argon
SP 168 - argon (This and the liconix HeCd are my favorite two lasers....)
SP 265 - PSU for the aforementioned argons
two HGM5's
2201-40ML
Two 2214-30SL
2114-25ML
lasos LGK blah blah something or other 40mW argon
CNI 100mW 473
300mW 650nm red module
about 10 red HeNe's
1mW green HeNe
4mW yellow HeNe
Liconix 4240N 442nm HeCd. ~50mW but the power is rising every day. Gotta bury that helium!!!

*glances around to see what he missed*

Uhh a little 200mW 532nm CNI pen
300mW 532nm module
about a million and a half loose diodes and odds and ends
Reliant 250M
a couple little hand-held blu-ray lasers

Plus a whole lot more. That's just the notable stuff.

[tocket]

Pretty short list for me now:
400 mW Laserwave 532 nm
100 mW Viasho 473 nm
~400 mW homebuilt 658 nm (2 burner diodes driven by die4drives)
35 mW DX 532 nm

Portable:
~100 mW 405 nm homebuilt with flexdrive
~250 mW 658 nm in a kryton groove w/ flexdrive
5 mW 532 nm pointer

[Carl B]

Another short list of laser gear for me.

1st. I have two green projectors. One with a 150mW CNI that's doing about 260mW. The second one has a 300mW LaserWave. Both of these are controled by my ChamTech PM25.

2nd. Another LaserWave 300mW Green that is doing 600+mW which is now destine for being installed in my rebuild of the Laser Harp.

A second green CNI 150mW doing about 190mW
Three other cheap greens one of which is in an AT Laser projector with 10k scanners.

And finally a 633nm Red HeNe doing about 7.5mW that I bought from Smog.

Was very tempted to buy badger1666's complete RGB system but bottled out in the end. Sort of regretting it now.

Carl

[smogthemog]

At the very moment I have the following:

600mW Analog RGB (a highly modified Chineeeese jobby with LW50K scanners, modded cooling, Hoya AR glass, Quick release front, Fully converted from TTL to Analog by Mr Stanwax , LaserWave dichro mounts with 'Stanwax laser' feet & LW dichro's)

2 Watt RGY (Viasho 1W 532nm Green, 1W 635nm very Red Homebrew with twin 500mW Multimode 635nm diodes driven by 2x Die4drives LAC optics & full TEC cooling. 6mm output beam @ 1.3mR, Scaneco 20K's, Insanity Case with Hoya AR glass)

Chamtech ALC60 Multiline Argon 90mW with PM21 controller desk.

Spectra Physics 40mW Multiline Argon + PSU

2x 650nm 300mW mini modules ready to be PBS'd together and to replace the 650 CNI in my RGB.

594nm Yellow 2mW HeNe + PSU

543nm Green 0.7mW HeNe + PSU

2x 633nm Red 5mW HeNe's

405nm 5mW Pointer

650nm 250mW Pointer

488nm 20mW OPSL laser (just arrived this morning )

2x 650nm 250mW open cans to go in Meredith mounts to complete a 500mW PBS setup.

100mW 405nm diode still in the sledge awaiting a decent host

Mamba Black + DAC

Monch lite + DAC

NLS with 3x Framestreamer DAC's