Jinan Wisdom Machinery

[glasslook]

Important notice to all CNC community.
Our company did bought from Jinan Wisdom Machinery a Laser machine model CYJ-1621. Before, we did requested prices according to a list of components they should use.
Problems:
1. They offered 7 days delivery after our payment, they took more than 2 month for shipping it.
2. Machine receved was not the ordered one, not working, electrical cables stripped, ball bearings already seized, working table curved (not flat), paint peeling, steel construction of very bad quality, no instructions or software as agreed, ...
We did requested a repport from a local engineer and have photos if someone wants to see.
Be aware of this, we have 2 other Laser machines from China with very good quality, and working for years and never supposed this could happen.

[Banthai]

OOOHH really

So I guess you are also a China CNC manufacturer trying to dish your competitor in china ...
You obviously did not look at this forum before you posted ....

Let me translate your first post

Hello im glasslook and im from china ... i work for a CNC manufacturer here and want to say hello to everyone on the forum and introduce myself
I would also like to increase my sales commision by posting bad things about our competitor ...
I would also like to post here before i even look at all the other posts to realise that this is not a CNC related forum ... and will make not a sniff of a wiff difference ...
apart from Dan ,, who will never ever buy a machine from "Jinan Wisdom Machinery" ever again .... you have been warned Dan

oh dear ... me thinks i need to go back to rehab
on a positive note ... Im going to see Joe Bonamassa at the blackpool opera house on thursday .... only problem is my comany is flying me back from India to the UK on wednesday evening ... going to be jetlagged and dont want to fall asleep half way through

all the best ... Karl

[dsli_jon]

Heya Sir Karl -

nice t' see ya posting again.. haven't had a good rolling-laugh in awhile...

...going to be jetlagged and dont want to fall asleep half way through

Down in El Sal, the Show Techs I used to train were always hawking these 'B-complex shots', ya know, as a 'hardcore energy-boost'... ie: http://www.drnirvana.com/b12-homeopa...the-super-shot (..'Dr Nirvana', lol.. ..sort of like 'mainlining a Rockstar', with a capful o' viagra, for good-measure... Right in the upper-thigh, *whack* and you'd be all hopped-up for the next 12 hrs... worked like a charm... ..ah, drugs..

RE: post, ^ ...Err, never mind...

..anyhoo, good t' see ya... cheers..
j

[glasslook]

I also think you need rehab for much long.
I am a Portuguese company that bought a LASER machine in China with very bad quality.
So I am advising people who can buy from them not to do it.
I have plenty of photos and an engineering report about the machine.

Let me translate you message:
I am Banthai and am here to make jokes and beeing smart ass.

OOOHH really

So I guess you are also a China CNC manufacturer trying to dish your competitor in china ...
You obviously did not look at this forum before you posted ....

Let me translate your first post

Hello im glasslook and im from china ... i work for a CNC manufacturer here and want to say hello to everyone on the forum and introduce myself
I would also like to increase my sales commision by posting bad things about our competitor ...
I would also like to post here before i even look at all the other posts to realise that this is not a CNC related forum ... and will make not a sniff of a wiff difference ...
apart from Dan ,, who will never ever buy a machine from "Jinan Wisdom Machinery" ever again .... you have been warned Dan

oh dear ... me thinks i need to go back to rehab
on a positive note ... Im going to see Joe Bonamassa at the blackpool opera house on thursday .... only problem is my comany is flying me back from India to the UK on wednesday evening ... going to be jetlagged and dont want to fall asleep half way through

all the best ... Karl

[dsli_jon]

agradecimentos pela clarificação de quem você é. o meu amigo não pensou ser ofensivo acabamos de sofrer a muito dos 'spam' chineses, assim, agradecimentos pelo aviso, e por favor desculpe!

ciao
j

[laserdj]

It´s an engraving machine, right? Care to post some pictures? How much did you pay for it?

@dsli_jon : Parabéns!!! Not rusty at all, mate!

[soforene]

I also think you need rehab for much long.....

Let me translate you message:
I am Banthai and am here to make jokes and beeing smart ass.

Oooohhhh... She no love you long time Mr Banthai.
She give you long time plenty Bitch slap though !!

Attachment 31518

[dnar]

I am <insert name here> that bought a <insert product name here> in China with very bad quality.

If only I had a Clue (tm) for every time I have heard that...

Let me translate you message:
I am Banthai and am here to make jokes and beeing smart ass.

Nice. Best you watch out for the Cluebyfour.

[dnar]

I am <insert name here> that bought a <insert product name here> in China with very bad quality.

If only I had a Clue (tm) for every time I have heard that...

If your after a real laser engraver, spend the $$$ and buy an Epilog.

Let me translate you message:
I am Banthai and am here to make jokes and beeing smart ass.

Nice. Best you watch out for the Cluebyfour.

[Stoney3K]

Nice. Best you watch out for the Cluebyfour.

You might want to do the same to Banthai in that case sine he was the one who is evidently trolling. The man has a point.

I don't see any bad intent here or any way 'glasslook' is advertising his own merchandise like the Chinese manufacturers do. If the laser engraver he bought was a dud as he says, he just wants to warn others and may just have ended op at the wrong forum. Don't forget, if you Google 'laser', we're quite high up the score list.

To us, buying crap from China may be kind of "Captain Obvious", but it may be different in the laser cutter/engraver community which also has a huge influx of Chinese garbage.