Mounting the galvo block....how?

[borgqueenx]

Well since i need my lasers to be 5mm higher, i now have a 5mm thick plate i need to place under my galvonometers....

How do i mount them?
there are only 3 holes under the galvo block...How am i supposed to know the exact position to drill into the 5mm thick plate to have holes exactly under the galvoblock holes?

[Jimboy3625]

How am i supposed to know the exact position to drill into the 5mm thick plate to have holes exactly under the galvoblock holes?

You can use a paper template. Place some paper on the back of the galvos and cut out the screw holes and then transfer the paper to the plate and drill the holes in the cut outs.

[dilbert]

Download the template from the scanner info in the section on Rob's (STANWAX) website - I used fine.

[borgqueenx]

You can use a paper template. Place some paper on the back of the galvos and cut out the screw holes and then transfer the paper to the plate and drill the holes in the cut outs.

yeah that seems like a good idea thanks. didnt popped through my (simple) mind.