4 x Clay Paky Miniscan HPE scanners in touring flightcases

[norty303]

I'm just gauging interest at the moment, but is something I've been toying with for a little while.

I have 4 Clay Paky Miniscan HPE's cased in pairs (slightly different shape cases for each pair, one has an extra pocket for stashing IEC cables, 5 pin to 3 pin DMX adaptors, etc)

Probably looking for around £1k, and someone in the UK due to the cost of shipping them.

PM me if you'd like to talk more (money or details). I won't fill the post with too many details as if you're interested, you'll know what they are and what they do.

Cheers

[Jem]

Link to more info on these here...

http://www.claypaky.it/media/documen...e_EN_Rev.1.pdf

Would love these but having just spent a load on a Bose L1 model 2 system the account's looking a bit stretched

Just out of interest, what Gobo's do they come with, how old are the bulbs (hours) and how much are new bulbs?

Cheers

Jem

[norty303]

Sorry for brief reply and lack of links but I'm on my phone. The gobos are all standard ones, there were a couple of non standard breakups in a couple when I got them which I replaced with the original ones. No idea on lamp hours, the capsules are a little clouded but still give more output than an MSD250/2 so in good health. They take the HTI300DX I think it is which are quite expensive, but you can get a suitable lamp on eBay for less (I was going to try some next). If someone is wanting to take these I'd be up for supplying 4 of those lamps too as part of the deal (or knock off the value).
I also have a spare condenser lens which I'll throw in. They sometimes had a habit of cracking these due to the high temps and cooling but something I've never experienced. I'll chuck in a pair of 5 to 3 pin DMX adaptors too for each head.

[absolom7691]

Is is safe to assume that these are 240VAC and not 120VAC? Or selectable?

[norty303]

I'd have to take a look but I really think shipping across the pond would not be worth it. Plenty of good examples available surely in States

[absolom7691]

True enough. Good luck with your sale!

[gashead]

DAMN....

I've been wanting to work some automated fixtures into my non existent laser shows.

Mr Norty, don't suppose you're planning on attending Surfleet ?

[norty303]

I'm not I'm afraid, it clashes with a festival I'm doing. In fact this year, everything has clashed with a festival/outdoor event! Its been flippin mental!
I may have up to 8 Robe DJ Scan 250XT available as well, and these are a bit more shipable if it wasn't the HPEs you were after specifically.
I could always find out what freight would be on the HPEs if you like.
Currently, these are all required for work during September due to the lack of availability of their replacements unfortunately.